 |
 |
 |
 |
|
Product Detail |
 |
This is the Radio Controlled, Glow or Gasoline Powered, Ready-to-Cover,
Top Flite P-51D Mustang 1/5 scale Sport Model Airplane Kit.
For intermediate to advanced modeler fliers
who want to create their own covering scheme.
84.5" IMAA legal wingspan
FEATURES: Construction: Fully sheeted balsa and plywood with unpainted
fiberglass fillets
Wing: One-piece, built up wood frame which is then sheeted with wood
Radio Compartment: Easily accessible, plywood reinforced
Cowling: Fiberglass, unpainted
Canopy: Clear, single,
Landing Gear: Fixed heavy duty wire (¼"), but is also set up to use
optional Robart retracts with functional landing gear doors, see
COMMENTS
Dual Wing Servos: Two servos per wing half (1 Flap, 1 Aileron)
Spinner: 5" (127mm) Aluminum
Cockpit Kit: ABS plastic with decals
Building Time: Ready to fly in only 30-35 hours.
Warranty: Top Flite Models guarantees this kit free of defects
in material and workmanship at the date of purchase. Warranty
does not cover any component parts damaged by use or modification.
INCLUDES: Pre-built wings, fuselage and tail assemblies, pushrods,
pre-bent ¼" (6mm) fixed main landing gear, 5" (127mm) main wheels
2" (51mm) tailwheel, adjustable engine mount, 32oz (960cc) fuel
tank, 5" (127mm) spinner, wood servo trays and wing joiner,
extensive hardware package and photo-illustrated instructions
REQUIRES: Engine: 2.1 -2.8 cu in (34.5 - 46cc) 2-stroke
OR 2.5 -4.3 cu in (41-70 cc) spark ignition gasoline engine
Muffler: Pitts style
Radio: 5 - 7 channel
Servos: 10-11 Standard (2-Aileron, 2-Elevator, 1-Throttle, 1-Rudder,
2-Flaps, 1-Tail Steering, 1-Air Control Valve)
Servos with a minimum 50 oz-in (3.9 kg-cm) of torque required for
elevators, rudder and ailerons, standard servos may be used
everywhere else
Servo Extensions: (2) 24" Extension, (1) Dual Servo Extension
(4) 6" Extensions
Y-Harness: (1) Y-harness for flaps
Covering: seven 6-foot rolls
Misc. Items: Glow plug, ¼" foam rubber padding, medium fuel tubing,
fuel filter, propeller, building and field equipment.
SPECS: Wingspan: 84.5" (2146mm)
Wing Area: 1245 sq in (80.3 sq dm)
Weight: 17.5 - 19lb (7.9 - 8.6kg)
Wing Loading: 32 - 35 oz/sq ft (98 - 107 g/sq dm)
Length: 73.5" (1865mm)
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 4-9/16" (116mm) Back from the wing's leading edge
Control Throws: High Rate Low Rate
Elevator: Up & Down 9/16" (14mm) 3/8" (10mm)
Rudder: Right to Left 1½" (38mm) 1" (25mm)
Ailerons: Up & Down ¾" (19mm) up ½" (13mm) up
5/8" (16mm) down 3/8" (10mm) down
Flaps: 1-3/16" (30mm) 2-1/8" (55mm)
COMMENTS: Pilot shown inside the plane is not included.
Following is a complete list of items required to install Robart
retracts;
#611-5 Pneumatic Landing Gear ROBQ1635
#160LWC Tail Gear Assembly ROBQ2225
#157VRX Air Control Kit ROBQ2305
#169 Pressure Tubing ROBQ2369
#190 Quick Disconnects ROBQ2395
#500 Treaded Lightweight Wheel DUBQ0847
Size "F" (6.5mm or 17/64" (6.8mm) drill (to enlarge wheel holes for
axles)
1¾" (45mm) Tailwheel GPMQ4220
|
|
 |
 |
|
|
|
 |
 |
 |
