 |
 |
 |
 |
|
Product Detail |
 |
Features
Novak GTB Programmable Brushless/Brush ESC 1710
Optimized to function with spread spectrum systems such as Futaba, Nomaidio and Spektrum
Significantly faster MOSFET switching speeds provide improved performance and lower speed control operating temperatures
Six throttle profiles 5 brushless, one brush
Four Adjustable Parameters: Minimum Brake, Drag Brake, Dead Band, &
Minimum Drive, as well as Drive Frequency (In Brushed Mode Only)
Clear cooling fan 1.2 x 1.2 x 0.31" (30 x 30 x 8mm) mounted on factory-installed heat sink
Built-in Li-Po Cut-Off Circuitry
One-touch set-up programming and four status LEDs
Gold-plated PCB direct-solder wiring tabs
User-replaceable input and switch harness
Water resistant case
120 day warranty
Specifications
Length: 1.49" (37.8mm)
Input Voltage: 4-6 cells (1.2V/cell or 4.8-7.2 total volts) or 2 Li-Po cells (2S 7.4V)
On-Resistance 0.00040 ohms (brushless), 0.00013 ohms (brushed)
Size: 1.16 x 1.49" (29.5 x 37.8mm)
Weight 1.36oz (38.6g)
Rated Current: 540A per phase (brushless), 1620A (brushed)
Braking Current: 540A per phase (brushless), 1620A (brushed)
Power Wire Size: 16 gauge
BEC: 6V/3A
Motor Limit: Any Novak 540-size brushless motor; No brushed motor limit
Discrete Steps: 1024 Forward; 1024 Reverse
Battery and Motor Plugs: None
Contents
Novak 2.4GHz 1711 GTB Spread Spectrum Speed Control, factory installed power wires and power trans cap module, user replaceable remote power programming switch and input harness, double-sided tape and instructions
Requirements
Installing in model and connecting to receiver, battery and motor
|
|
 |
 |
|
|
|
 |
 |
 |
