 |
 |
 |
 |
|
Product Detail |
 |
This is the Hobbico Accu-Glo II Power Panel. This panel powers Starters, Chargers, Fuel Pumps, and Glow Starters and monitors condition of Glow Plugs. This Power Panel comes with a hard plastic case or can be mounted to any Field Box with a standard sized cutout for a Power Panel.
Features
Hobbico Accu-Glo II Power Panel HCAP0306
Fuel Pump switch from original Accu-Glo was replaced by separate color-coded push-buttons for "FILL" and "EMPTY." Press once to Start, again to Stop
Four LEDs, 11V, 11.5V, 12V, and 12.5V indicate Field Battery condition-an improvement from one light that glowed either Green or
Red on original version
Glow Starter Charger keeps unit fully charged at a constant 300-400mA rate
Automatic Glow Power Management section tells when glow plug is fully charged and if plug continuity is good
Adjustment dial allows automatic glow heat customization to the model; once set the unit maintains proper heat regardless of glow plug's condition
Two year limited warranty
Specifications
Input Voltage: 11-13V DC
Input Voltage Indicators: Four LEDs
Starter Jacks-Output Voltage: 12V DC
Fuel Pump Controls: Yellow "FILL" pushbutton; Red "EMPTY" pushbutton
Glow Heat Power Circuit: Automatic heat adjustment
Glow Heat Status Indicators: "HOT" and "COLD" LEDs
Glow Heat Continuity Indicators: "GOOD" and "BAD" LEDs
Glow Starter Charger Current: 300-400mA constant current (not timed)
Glow Starter Output Jack: Glow driver mounting lug with LED
Fuse: 7.5A spade type
Weight: 8.3oz (235g)
Dimensions: 6" x 3.7" (152 x 94mm)
Contents
One Hobbico Accu-Glo II Power Panel with two alligator clips, two Black and two Red banana plugs, two plastic plug covers, four M3x10 self-tapping screws to mount panel to Field Box
Requirements
12V battery, use HCAP0800
|
|
 |
 |
|
|
|
 |
 |
 |
