 |
 |
 |
 |
|
Product Detail |
 |
Associated Factory Team RC10GT2 Kit Non-Pull Start 7080
This is the 1/10 scale glow powered, radio controlled, Associated Factory Team RC10GT2 Off-Road Truck Kit. Contains the following Factory Team Hop-ups; Finned Engine Mount PTFE-coated Threaded Shock Bodies with Collars Unobtainium Coated Shock Shaft Blue Aluminum Shock Bushings, Bulkhead, Hinge Pin Brace, Chassis Brace Black Hard Anodized 6061-T6 Aluminum Chassis CVA Joint with Quick Change Hubs 4 Steering Ball Bearings Blue Titanium Turnbuckles Blue Aluminum Rod-End Pivot Balls Polished Blue Anodized Tuned Pipe Blue Aluminum Servo Mounts and Flywheel Light Outdrives
Features
Associated Factory Team RC10GT2 Kit Non-Pull Start 7080
Chassis: Anodized 6061 aluminum with molded front kickup and modular radio tray, dual deck layout, blue aluminum front bulkhead
Drive: Rear wheel drive
Drive Shafts: Dogbones
Exhaust: Blue anodized tuned muffler - ASCG1774
Fuel Tank: 2.8oz (82cc) flip top cap - ASCC7899
Clutch: Large diameter 2-shoe for SG type crankshafts
Transmission: Single-speed, 4.09:1 ratio
Ball Bearings: Full set shielded type
Shocks: Four oil-filled, with coil-over springs, PTFE coated
Main Gear: 54 tooth - ASCC7955
Receiver Box: Sealed - ASCC7896
Differential: Ball diff
Brakes: Free floating disc
Tires: Front Proline Edge M3 2.2" diameter 2" wide - PROC8097
Tires: Rear Proline Bowtie M3 2.2" diameter 2.0" wide - ASCC7879
Wheels: 2.2" diameter, 2" wide - ASCC7846 front - ASCC7980 rear with Posi-Lock quick change rear wheel system with five-lug self- aligning design for fast pit stops without having to worry about lining up the wheel onto a hex or drive pin. Posi-lock quick change system is lightweight for reduced unsprung weight and rotating mass
Body: Clear untrimmed Associated Interceptor Truggy - ASCC7992
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Dual ball bearing, dual bell-crank with adjustable servo saver, heavy duty steering blocks
Turnbuckles: Factory Team, blue anodized titanium
Specifications
Vehicle:
Length: 16.5" (420mm)
Width: 13" (330mm)
Height: 6" (152mm)
Weight: 4.1 lbs (1850g)
Wheelbase: 11.2" (285mm) adjustable
Tread- Front- 11" (280mm) Rear- 10-7/16" (276mm)
Front Track: 12.75" (325mm)
Rear Track: 12.5" (320mm)
Ground Clearance: 1.5" (37mm)
Gear Ratio: 4.09:1
Tires- Front: 2.2" x 2"
Rear: 2.2" x 2"
Body-
Length: 17" (431mm)
Width: 6.5" (165mm)
Height: 4.25" (108mm)
Contents
Associated Factory Team RC10GT2 Off-Road Truck Kit with oil-filled shocks, tires, wheels, body, decals, 20 tooth bell, 54 tooth spur, hardware and illustrated building instructions.
Requirements
Radio: 2-channel with 2 standard servos
Transmitter Batteries: Eight AA size
Receiver Battery: 5-Cell Hump Pack - DTXM2010
Engine: .12-.15 cu in (2.0 -2.4 cc) non pull start with SG (pilot) style crankshaft and rotary carburetor (standard crankshafts will fit using #2312 (ASCC4312) optional Clutch Nut)
Glow Starter: 1.2 volt
Paint: Polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant
Miscellaneous building and field equipment
|
|
 |
 |
|
|
|
 |
 |
 |
