 |
 |
 |
 |
|
Product Detail |
 |
Features
Megatech Afterburner 1/10 RTR Nitro Funny Car Drag Racer RTR MTC7811
Chassis: .098" (2.5mm) thick anodized aluminum, purple in color, drift optimized with repositioned center of gravity to help car rotate smoothly for easy drifting, 7.5" (190mm) width accepts all 190 and 200mm bodies
Drive: Four wheel shaft drive
Radio: HPI TF-1 2-channel pistol grip 27MHz with dual rate, steering and throttle trim and reverse, two standard servos and enclosed receiver/battery box Engine: HPI G3.0 .18 cu in (3cc) with pull-start, foam air filter rotary carburetor, glow plug
Exhaust: Composite construction with rear exhaust, high-flow aluminum header and rear exit exhaust tube
Fuel Tank: 2.53oz (75cc), flip top cap
Clutch: 2-shoe with 18 tooth steel clutch bell
Transmission: Single-speed
Ball Bearings: Full set
Shocks: Four oil-filled, with drift rate springs
Main Gear: 47 tooth plastic construction
Gearbox: Sealed, front and rear
Differentials: Sealed, with metal bevel gears, limited slip front differential
Brakes: Single disc, fiber construction
Tires: Type A drift radial 1.02" (26mm) wide, 63.5" (2.5") diameter
Wheels: Volk TE-37 six spoke chrome wheels 1.02" (26mm) wide, 2" (51mm) diameter
Body: Painted and trimmed Toyota Vertex Ridge with racing wing and all sponsor decals applied
Bumper: Front foam
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank with servo saver
Specifications
Vehicle-
Length: 15" (378mm)
Width: 7.5" (190mm)
Height: 4.6" (117mm)
Weight: 4lbs (1760g)
Wheelbase: 10" (256mm)
Front Tread: 6.8" (173mm)
Rear Tread: 7" (176mm) wheels on-center side-to-side
Front Track: 7.9" (200mm)
Rear Track: 8" (203mm) wheels at outer edges
Ground Clearance: 0.35" (9mm)
Body-
Length: 18.5" (470mm)
Width: 7.7" (197mm) at rear wheels (widest point) 7.5" (190mm) behind from wheels (thinnest point)
Height: 4.5" (114mm)
Package Contents
HPI Nitro RS4 3 Ready to Run Drift Car with the Toyota Vertex Ridge body, G3.0 .18 cu in (3cc) engine with pull starter, glow plug 2-channel radio w/two standard servos and instructions
Requirement
Radio Batteries: 12 AA size
Fuel bottle, glow starter and miscellaneous track equipment
Fuel: 2-stroke glow fuel with 10%-15% nitromethane, 16% lubricant
|
|
 |
 |
|
|
|
 |
 |
 |
