 |
 |
 |
 |
|
Product Detail |
 |
This is the 1/8 scale glow powered, radio controlled, HPI Savage X SS off-road Monster Truck Kit with the K4.6 Engine and clear Nitro GT-2 Body. Unassembled and requires radio system.
Features
HPI 1/8 Savage X SS K4.6 Kit 861
Chassis: Rigid 6061 series aluminum TVP (Twin Vertical Plate)
Drive: Four wheel shaft drive with heavy duty dogbones
Engine: HPIG1501, HPI K4.6 28 cu in (4.6cc) with 2.9 horsepower, with pull-starter, ABC construction, 8 port chrome plated brass sleeve for high RPM operation, lightweight aluminum piston and connecting rod, 8.5mm composite slide valve carburetor for improved high temperature tuning, glow plug and dual stage air filter
Exhaust: Dual chamber polished aluminum tuned pipe with header
Fuel Tank: 5.4oz (160cc), flip top cap
Clutch: Three shoe
Transmission: Two-speed with adjustable slipper clutch and heavy duty metal gears
Ball Bearing: Full set of rubber sealed bearings
Shocks: Eight oil-filled, long stroke with coil-over spring
Main Gear: Steel, 47 tooth
Gearbox: Sealed front and rear
Differentials: Four gear planetary type with heavy duty diff shafts and alloy cases
Brakes: Adjustable dual vented stainless steel discs
Tires: Dirt Bonz, diameter: 5.71" (145.1mm), width 3.38" (85.8mm)
sticky S compound with bone shaped tread for high traction on dirt
Wheels: Chrome Warlock with 17mm hex, width: 2.2" (56mm), diameter 3.3" (83mm)
Body: Pre-trimmed unpainted Nitro GT-2 with pre-cut decals
Bumpers: High impact nylon front and rear skidplate type
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Suspension: Front and rear heavy duty reinforced suspension arms uprights and knuckles, wide track (nearly 17") (432mm) design
Steering: Bell crank
Servo Saver: Adjustable cam type for optimum steering response and extra servo gear protection
Specifications
Vehicle-
Length: 21" (533mm)
Width: 16.8" (427mm)
Height: 10" (254mm)
Wheelbase: 13.25" (336mm) wheels on-center front-to-rear
Suspension Travel: 6" (152mm)
Tires: diameter: 5.71" (145.1mm), width 3.38" (85.8mm)
Body-
Length: 19.2" (488mm)
Width: 8.7" (221mm) at rear wheels, widest point
7.2" (184mm) behind from wheels, thinnest point
Height: 4.9" (125mm)
Package Contents
One HPI Savage X SS Monster Truck kit with oil shocks, K4.6 engine, clear body, decals, tires, foam inserts, 6 spoke chrome wheels 17 tooth clutch bell, 47 tooth spur gear, instructions
Requirement
Radio: 2-Channel with 1 standard servo for throttle, 1 high torque servo for steering, and 1 standard size and torque servo if the optional reverse module (HPIC8739) is purchased.
*If using the optional reverse module a 3-channel radio must be used.
Radio Batteries: (8) AA size
Receiver Pack: 6V 5-cell hump configuration
Wall Charger: For receiver pack
Glow Starter: 1.2V
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-stroke glow fuel with 20% nitromethane, 16% lubricant
|
|
 |
 |
|
|
|
 |
 |
 |
