 |
 |
 |
 |
|
Product Detail |
 |
Features
Hot Bodies 1/8 D8 Kit 67300
Chassis: 0.16" (4mm) thick 7075 aluminum with one-piece engine mount and radio tray
Drive: Four wheel shaft drive
Fuel Tank: Plastic with flip top cap
Air Filter: Foam low profile design
Clutch: 3 shoe
Clutch Bell: 16 tooth steel
Transmission: Single speed
Ball Bearings: Full set
Shocks: Four oil-filled, 16mm big bore aluminum bodied
Main Gear: 48 tooth
Gearboxes: Sealed
Differentials: Planetary
Brakes: Dual disc
Wheels: Yellow plastic dish wheels, 3.2" (82mm) diameter, 1.6" (40mm) wide, 17mm hex
Body: Clear untrimmed buggy body
Bumpers: Front hardened plastic
Suspension: Hardened plastic arms with captured hinge pins
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bell crank type with servo saver
Warranty Period: Two year limited
Specifications
Vehicle-
Length: 19.7" (500mm) from front bumper to end of rear wing
Width: 12" (305mm)
Weight: 7.5lbs (3402g) approximately
Wheelbase: 12.8 - 12.9" (325 - 328mm) wheels on-center front-to-rear
Gear Ratio: 4.3:1
Body-
Length: 14.6" (371mm)
Width: 7.5" (190mm) at middle section (widest point) 1.4" (35mm) ahead of front wheels (thinnest point)
Height: 3.4" (86mm)
Contents
1/8 scale Hot Bodies off-road Buggy Kit, foam air filter, body, wheels, 16 tooth clutch bell, 48 tooth spur gear, instructions and decal sheet
Requirements
Radio: 2-Channel with 2 Servos (one high torque servo for steering)
Radio Batteries: (8) AA size
Receiver Pack: 6V hump
Engine: .21 cu in (3.4cc) rear exhaust
Exhaust: Tuned pipe
Tires: 1/8 scale off-road buggy
Glow Starter: 1.2 volt
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant
|
|
 |
 |
|
|
|
 |
 |
 |
