 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered, almost ready to fly
Multiplex Easy Glider Sailplane.
For beginning to intermediate glider fliers.
FEATURES: Construction: Elapor foam white in color, can be painted (must first
use Elapor primer #60 2700 or equivalent)
Wings: Two-piece with fiberglass wing tube, removable wings for easy
transport
Canopy: Elapor foam removable for access to motor and radio equipment
Motor: Permax geared speed 400
Speed Control: Multiplex X-16 electronic
Propeller: Folding, black in color
Spinner: Plastic 1" (26mm) diameter, black in color
Aileron Control: Dual servo, two micro servos and extensions with
universal connectors included, ailerons can be deflected up to act
as spoilers if radio includes this option
INCLUDES: Multiplex Easy Glider Sailplane, speed 400 motor, gearbox, propeller,
canopy, illustrated instruction manual, decal sheet, ESC, two
aileron servos, elevator and rudder servo, set-up DVD, all linkages
and control horns
REQUIRES: Radio: 4-channel transmitter and receiver
Battery: 7-8 cell NiCd or NiMH (GPMP0250), or 2 cell LiPo
These batteries require the Female Red 2-Pin Connector
(GPMM3107) to be attached to the speed control
Battery Charger: Designed for type of battery used
Glue: Regular (not foam safe) CA with activator see COMMENTS
(hot melt glue from a glue gun can also be used)
Building and field equipment
SPECS: Wingspan: 71" (1800mm)
Length: 44" (1115mm)
Weight: 31oz (880g)
Wing Area: 644 sq in (41.6 sq dm)
Wing Loading: 6.8 oz/sq ft (21 g/sq dm)
Center of Gravity: 2.75" (70mm) from wing root measured at the
fuselage
Control Throws-
Elevator (up and down): 0.51" (13mm)
Rudder (left and right): 0.79" (20mm)
Ailerons: up 0.79" (20mm)
down 0.31" (8mm)
Spoilers (both ailerons up): 0.79" (20mm)
Elevator Mix with Spoiler: 0.20" (5mm)
COMMENTS: This model is not made of styrofoam and is not compatible with white
glue or epoxy. Use only CA glue with an activator.
|
|
 |
 |
|
|
|
 |
 |
 |
