 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered, Multiplex Mini Mag Park Flyer Trainer Airplane Kit. For Beginning Modeler/Fliers. Looking for a handsome, easy to fly trainer with a scale appearance? Multiplex brings you the MiniMag. Conveniently sized to be flown in a small area and transported with very little effort, the MiniMag is constructed of durable ELAPOR Foam and has the option to add aileron control for enhanced flight characteristics. The MiniMag takes off and lands from a hard surface with the included landing gear or can be built with the optional float set (sold seperately) for water take-offs and landings. Available as a Kit, Receiver Ready, and Ready to Fly. Float set requires brushless motor for water take-offs.
Features
This is the radio controlled, electric powered, Multiplex
Mini Mag Park Flyer Trainer Airplane Kit.
For Beginning Modeler/Fliers.
FEATURES: Construction: Molded Elapor foam white in color
Wings: Molded Elapor foam (one-piece)
Motor: Permax 400, 6V
Prop: Paul Gunther #203 5x4.5 (125mmx110mm)
Radio Compartment: Accessible under wing
Landing Gear: Prebent fixed wire 0.16" (4mm) diameter,
can be fitted with optional Float Set MPUQ7369 (not included)
Float Set requires brushless motor for water take-offs
Wheels: Two foam 2" (54mm) diameter
Aileron Control: Can be added for enhanced flight characteristics
Cowl: Elapor foam,
Hardware: Complete set included featuring .031" diameter pushrods
Decals: Peel and stick application with yellow, orange and red
accents and black windows
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.16" (4mm) wire landing gear, two 2" (54mm)
wheels, speed 400 motor, electric motor mount, 5x4.5 prop, decal
sheet and illustrated instructions.
REQUIRES: Radio: 3 channel (4 channels if building with ailerons)
Servos: 2-4 nano size servos (1 rudder, 1 elevator, 2 for ailerons)
Y-Harness: 1 required if using ailerons - HCAM2500
Battery: 7 cell AA size battery or 2-3 cell LiPO - GPMP0712
Speed Control: GPMM2025 (will require soldering motor leads and 3.5mm
male bullet connectors to the motor
Misc. Items: Building and field equipment
SPECS: Wingspan: 39.75" (1010mm)
Weight: 20.5oz (581g)
Length: 32.25" (819mm)
Airfoil: Flat bottom high-wing placement
Center of Gravity: 2.6" (67mm) back from the leading edge of the
wing at the fuselage side
Control Throws-
Elevator: up and down 7/16" (11mm)
Rudder: right and left 3/8" (10mm)
Ailerons: up 5/16" (7mm), down 1/8" (3mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
.
|
|
 |
 |
|
|
|
 |
 |
 |
