 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered Multiplex Cularis almost ready to fly 2.6 meter Glider. Can be built as a Pure Glider or Electric Powered Glider (see COMMENTS) For intermediate glider flyers. The Multiplex EasyGlider was the first step for many modelers into the world of model soaring and chasing thermals, now we are pleased to present the Cularis. Minimal cost and minimal effort minimal risk of breakage thanks to the robust ELAPOR Foam construction. Features “Full House” operation with ailerons and flaps for full trailing edge camber and reflex, plus CROW capability for accurate landings. Optional electric power set with ample power. Broad performance spectrum with a wide speed range, including aerobatics and thermaling The Cularis can be built as a pure glider or electric power.
Features
This is the radio controlled, electric powered Multiplex Cularis
almost ready to fly 2.6 meter Glider.
Can be built as a Pure Glider or Electric Powered Glider (see COMMENTS)
For intermediate glider flyers.
FEATURES: Construction: Elapor foam to resist damage, white in color
Wings: Full house design with ailerons and flaps for butterfly/crow,
dual carbon wing spars, mechanical wing retainer system
automatically plugs in and secures all wing mounted servos
Horizontal Stabilizer: Removable for transport
Aileron Control: Dual servo
INCLUDES: One Multiplex Cularis with decals, hardware and illustrated
instruction manual
REQUIRES: Radio System: 4-channel with micro receiver
Servos: Two tiny servos for elevator/rudder
Four nano servos for ailerons
Servo Extensions: Three 24" (600mm) for aileron servos
Y Harness: For aileron servos
Battery: 2100mAh 3S1P LiPo recommended
Battery Charger: LiPo compatible
Building and Field Equipment: Medium viscosity CA glue and activator,
see COMMENTS
SPECS: Wingspan: 102.75" (2610mm)
Length: 49.6" (1260mm)
Flying Weight: approx. 49.38oz (1400g) glider only
approx. 59.26oz (1680g) with standard power system
Wing Loading: approx. 8-10 oz/sq ft (25.5/30.5 g/sq dm)
Wing Area: approx. 853 sq in (55 sq dm)
CG (Center of Gravity): 74mm
Control Throws-
Elevator, Up and Down: +14mm/-14mm
Rudder, Left and Right: approx 30mm
Ailerons, Up: +20mm
Down: -10mm
COMMENTS: Motor and propeller not included, to convert to electric flight,
order MPUL9318. This set contains a brushless motor, ESC, propeller
and all hardware required for electric flight.
This model is NOT made of styrofoam and it is not possible to glue
Elapor foam using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
