 |
 |
 |
 |
|
Product Detail |
 |
This is a Radio Controlled, Electric Powered, Elapor Foam Construction Multiplex Acro Master 3D Airplane Kit. For Intermediate to Advanced Modeler/Flyers. Become a 3D expert with the AcroMaster! Multiplex proudly announce the first quiet electric plane that looks and flies like a .30 size 3D balsa plane but with the durability of ELAPOR Foam construction. Designed by Aerobatic Champion Martin Muller, the AcroMaster combines the ultimate in 3D flight capabilities with Multiplex's reputation for easy to build, easy to fly and very tough foam airplanes. Whether you are looking for a Sport Flyer, a Pattern Plane or pure 3D thrills, the handsome AcroMaster will satisfy your needs. It's also an ideal match for capabilities of the Optic 6 transmitter.
Features
This is a Radio Controlled, Electric Powered, Elapor Foam Construction
Multiplex Acro Master 3D Airplane Kit.
For Intermediate to Advanced Modeler/Flyers.
FEATURES: Molded, Elapor Foam fuselage parts, white in color
Wings: Molded, Elapor foam construction, white in color
Radio compartment: Elapor foam construction
Cowling: Elapor foam construction
Canopy: Elapor foam construction
Landing gear: Pre-bent .10" (2.6mm) diameter wire
Aileron Control: Dual Servo
Wheel pants: Elapor foam construction, white in color
Spinner cone: Elapor foam construction, white in color
Hardware: .070" (1.75mm) diameter pushrods, plastic hinges, and other
miscellaneous hardware
Designed by Aerobatic Champion Martin Mueller
Motor Mount: White plastic construction
Wheels: Elapor foam construction with metal axle sleeve
INCLUDES: Elapor foam airplane parts, pre-bent wire landing gear, 2" (51mm)
diameter wheels, fiberglass wing spar, hardware package, elapor
wheel pants and spinner cone, decals and illustrated instructions.
REQUIRES: Motor and ESC : Multiplex Power Kit (MPUG3215), Includes Himax
HC3516-1130 Brushless Motor and Multiplex MULTIcont BL-55 ESC
Battery - 3 cell LiPo - GPMP0617
Charger - GPMM3153 (charge lead required - GPMM3148)
Radio: 4-channel radio with micro receiver
Servos: 2 16oz/in torque minimum for the ailerons - MPUM6520
2 35oz/in torque minimum for rudder and elevator - MPUM6521
Servo Extension 12": 2 required for aileron servos - HCAM2100
Y-Harness: 1 required for aileron servos - HCAM2500
SPECS: Wingspan: 43" (1095mm)
Wing Area: 557.27 sq in (36.6 sq dm)
Weight: 32-36oz (907-1020g)
Wing Loading: 8.19 oz/sq ft (25 g/sq dm)
Length: 45.25" (1150mm)
Airfoil: Fully-Symmetrical, mid-wing placement
Center of Gravity: 4-3/4" (120mm) Back from the wing's leading edge
at the fuselage sides.
Control Throws- Low Rate High Rate
Ailerons: Up & Down 1-3/8" (35mm) 2-3/16" (60mm)
Elevator: Up & Down 1-3/8" (35mm) 2-3/4" (70mm)
Rudder: Right & Left 1-3/4" (45mm) 3-1/8" (80mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with an
activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
