 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered Multiplex Easy Glider almost ready to fly Sailplane. Electrify your soaring with the Easy Electric Glider. Featuring a quiet, electric, geared Permax Speed 400 motor and folding propeller for quick climbs to altitude and gentle gliding back down to Earth or catch a thermal and fly for hours. Assembly is fast with CA glues, and the sturdy ELAPOR Foam construction resists damage from the occasional “hard” landing. The Easy Glider Electric use throttle, elevator, rudder, and ailerons for control and two piece wing allows easy transporting to and from the flying field.
Features
This is the radio controlled, electric powered Multiplex Easy Glider
almost ready to fly Sailplane.
FEATURES: Construction: Elapor foam to resist damage, white in color
Wings: Two piece
Motor: Permax Speed 400 geared
Propeller: Folding (size not given)
Spinner: Black plastic, 1" (25mm) in diameter
Aileron Control: Dual servo
Control Surfaces: Elevator, throttle, rudder and ailerons
INCLUDES: One Multiplex Easy Glider kit with 400 size motor, gearbox, decals
propeller, spinner, hardware and illustrated instruction manual
REQUIRES: Radio System: 4-channel with micro receiver
Servos: Two micro size for elevator & rudder
Two nano size for ailerons
Servo Extensions: Two 24" (600mm) for aileron servos
Y Harness: For aileron servos
Battery: Multiplex 7-cell #15 6030 or 8-cell #15 6037 (as of this
writing 8/08/05, these batteries are not carried) A battery pack
can be assembled by wiring together 7 or 8 AA cells and gluing
together with Shoe Goo, DTXC2460.
Battery Charger: Timed or peak for type of battery used
Building and Field Equipment: Medium viscosity CA glue and activator,
see COMMENTS
SPECS: Wingspan: 71" (180.3cm)
Length: 44.25" (112.3cm)
Flying Weight: 31oz (880g) with standard power system
Wing Loading: 6.88 oz sq ft (21 g sq/dm)
Wing Area: FAI approx. 226 sq in (41.6g/sq dm)
CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
measured at fuselage side
Control Throws-
Elevator, Up and Down: 0.51" (13mm)
Rudder, Left and Right: 0.79" (20mm)
Ailerons, Up: 0.79" (20mm)
Down: 0.31" (8mm)
Spoilers-Both Ailerons Up: 0.79" (20mm)
Elevator Mix with Spoiler: 0.20" (5mm) all figures approximate
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with an
activator is the only method of gluing recommended by the
manufacturer.
For Easy Glider without motor, order MPUA2105
|
|
 |
 |
|
|
|
 |
 |
 |
