 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered, Multiplex EasyCub Trainer Airplane Kit. For Beginner Modeler/Fliers. The Easy Cub is the latest beginner’s model based on the popular Piper Cub. Built with the ultra durable ELAPOR® foam the Easy Cub was designed with the beginner in mind. When built with the optional power pack (#M993224) the Easy Cub has plenty of power for runway takeoffs or ad the optional float kit for water take offs and landings.
Features
This is the radio controlled, electric powered,
Multiplex EasyCub Trainer Airplane Kit.
For Beginner Modeler/Fliers.
FEATURES: Construction: Elapor foam white in color
Wings: Two-piece all foam
Radio Compartment: Accessible under wing
Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter,
tailgear, prebent 0.039" (1mm) diameter wire
Wheels: Main, two foam 2" (51mm), foam 1" (25.4mm) tailwheel
Canopy: Elapor foam
Decals: Peel and stick application with yellow and blue accents and
black window detail
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.039" (1mm) wire landing gear, two 2" (51mm)
main wheels, 1" (25.4mm) tailwheel, plastic motor mount, two
fiberglass wing spars, decal sheet and photo-illustrated
instructions
REQUIRES: Multiplex Power Pack, MPUG3224 this includes outrunner electric
motor, electronic speed control, propeller and prop adapter
Battery: 2100-2500mAh LiPo
Battery Connector Set: WSDM3001
Battery Charger: LiPo compatible with balancer
Radio: 3 channel
Servos: Two mini size, 1-Elevator, 1-Rudder
Misc. Items: Building and field equipment
SPECS: Wingspan: 55" (1397mm)
Wing Area: 565 sq in (36.5 sq dm)
Weight: 850.49g (30oz)
Wing Loading: 7.53 oz/sq ft) (23 g/sq dm)
Length: 38" (965mm)
Airfoil: Flat bottom high-wing placement
Center of Gravity: 3.1" (80mm) Back from the wing's leading edge
at the fuselage
Control Throws-
Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
Rudder: Right to Left 0.59" (15mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
