 |
 |
 |
 |
|
Product Detail |
 |
The Blizzard is a high-performance Sportliner model that pushes the envelope of the ELAPOR® technology. Built with the highest quality materials the Blizzard utilizes Glass Reinforced Plastic longerons and Carbon Fiber Reinforced Plastic spars to give it the torsional rigidity needed for its high performance flight characteristics. When built with the recommended power pack the Blizzard has the power for vertical hand-launches, breath-taking high-speed passes and thanks to the thin 8.9% airfoil the Blizzard is no slouch when it comes to riding the thermals either.
Features
This is the radio controlled, electric powered, almost ready to fly
Multiplex Blizzard Airplane.
For modelers 14 years of age and older.
FEATURES: Construction: Elapor foam, white in color, foam fuselage includes
fiberglass longerons
Wings: Two-piece with two carbon fiber reinforced plastic spars and
four supplementary spar caps
Radio Compartment: Accessible under canopy
Aileron Control: Dual servo
Decals: Peel and stick application with red and blue accents and
black window detail
Spinner: Plastic, blue in color 1.5" (38mm) diameter
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, plastic motor mount, four carbon fiber wing spars, decal
sheet, spinner and photo-illustrated instructions
REQUIRES: Multiplex Power Pack, M993233, MPUG9333
Battery: 2100-2500mAh LiPo MPUP5731 or MPUP5791
Battery Connector Set: WSDM3001
Battery Charger: LiPo compatible with balancer
Radio: 3 channel
Servos: Three mini size, 2-Aileron, 1-Elevator (fourth servo required
for optional supplementary rudder function) MPUM9233
Multiplex High Current Plug (MPUC8513) and High Current Socket
(MPUC8514)
Misc. Items: Building and field equipment
SPECS: Wingspan: 54.3" (1380mm)
Weight: 850.49g (30oz)
Wing Loading: (19.4sq dm)
Length: 35.8" (910mm)
Airfoil: Flat bottom
Center of Gravity: approximately 1.9 - 2.4" (50 - 60mm) aft of the
wing root leading edge
Longitudinal Dihedral: 1°
Motor Downthrust: 6°
Motor Sidethrust: 0°
Control Throws-
Ailerons: 14/6mm +/- Flaps: 2mm down
Elevator: 5/5mm +/- Spoilers: 0.5mm down
Rudder: 7/5mm +/- Snap-Flap: 2mm up
Elevator Compensation:
Spoilers: 0.5mm down
Flap: max. 1mm up
Power: 0.5mm down
Expo Elevator: 30%
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
