 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, glider or electric powered Multiplex Easy Glider Pro almost ready to fly Sailplane. The EasyGlider PRO is an updated model based on the popular and proven EasyGlider and EasyGlider electric. Just like the larger Cularis the Easy Glider PRO can be built as a pure glider or as an electric by adding the optional power pack. The Easy Glider Pro’s flying characteristics are perfect for the beginner, although this by no means implies that the more advanced pilot won’t enjoy it - quite the contrary. If you are an expert you will soon discover that the EasyGlider PRO has the kind of performance only seen with much larger and more expensive gliders. • Low sink rate• Can be ballasted to expand the airspeed range• Landing aid - both ailerons raised• Pre-fabricated molded ELAPOR® parts• Convenient method of aileron servo connection when the wings are fitted• Two-part wing with removable spar joiner for
Features
This is the radio controlled, glider or electric powered
Multiplex Easy Glider Pro almost ready to fly Sailplane.
FEATURES: Construction: Elapor foam to resist damage, white in color
Wings: Two piece with fiberglass wing joiner
Spinner: Elapor foam 2.2" (55mm) diameter
Aileron Control: Dual servo
Control Surfaces: Elevator, rudder and ailerons
INCLUDES: One Multiplex Easy Glider Pro with decal sheet, foam spinner, wing
joiner, pushrods, hardware and illustrated instruction manual
REQUIRES: Radio System: 4-channel with micro receiver
Servos: Two micro size for elevator & rudder
Two nano size for ailerons
Servo Extensions: Two 16" (200mm) for aileron servos
Y Harness: For aileron servos
Battery: at least 2100mAh
Battery Charger: LiPo compatible
If building as glider only the following items are required;
NiMH Receiver Battery (at least 1800mAh)
Switch Harness with Charge Jack
Launching Kit
If installing electric power the following items are required;
Easy Gilder Pro Power Set #33 2636 or upgraded Power Set #33 2642
Propeller Driver and Spinner #73 3500 (MPUG3226)
Building and Field Equipment: Medium viscosity regular (NOT syrofoam
safe) CA glue and activator, see COMMENTS
SPECS: Wingspan: 71" (180.3cm)
Length: 43.7" (112.3cm)
Flying Weight: 28.5oz (810g) with standard power system
Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system
Wing Area: FAI approx. 226 sq in (41.6g/sq dm)
Airfoil: Semi symmetrical
CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
measured at fuselage side
Control Throws-
Elevator, Up and Down: 0.31-0.39" (8-10mm)
Rudder, Left and Right: 0.59-0.79" (15-20mm)
Ailerons, Up: 0.59" (15mm)
Down: 0.24" (6mm)
Spoilers-Both Ailerons Up: 0.79" (20mm)
Spoiler Mixer (Elevator Trim Compensation): 0.16" (4mm)
COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with an
activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
