 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, electric powered, almost-ready-to-fly, Multiplex Gemini Park Flyer Trainer airplane. For Intermediate Modeler/Fliers. Biplanes have always held a special position in the history of aviation. Even today biplanes are still very popular, especially for aircraft which are required to combine agility, relatively low wing loading and compact dimensions. The distinctive biplane "look" also attracts many modelers to these aircraft, but in many cases they are frightened off by the considerable extra work and complexity compared to mono wing airframes. Not so with the Gemini ELAPOR model, which is quick to build, fast to rig, and available at a very resonable price, even with the suggested brushless motor power package. In comparison with models of "classic" balsa and film covering construction, it is downright inexpensive and infinitely more durable.
Features
This is the radio controlled, electric powered, almost-ready-to-fly,
Multiplex Gemini Park Flyer Trainer airplane.
For Intermediate Modeler/Fliers.
FEATURES: Construction: Elapor foam white in color, two piece fuselage
Wings: One-piece all foam
Radio Compartment: Accessible under wing
Landing Gear: Main, prebent fixed wire 0.16" (4mm) diameter
Tailgear, prebent fixed wire 0.039" (1mm) diameter
Wheels: Main, two Elapor foam 2" (52mm) Tailwheel, 1" (26mm) foam
Wheel Pants: Two-piece Elapor foam
Aileron Control: Single servo
Canopy: Single, tinted
Spinner: Elapor foam 2.5" (63mm)
Decals: Peel and stick application with silver and blue accents
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.16" (4mm) wire main landing gear, two main
wheels and one tailwheel, spinner, canopy, decal sheet and photo-
illustrated instructions
REQUIRES: Electric Power Set: Multiplex Gemini Power Set (MPUG3224)
recommended, consists of HiMax HC 2816-0890 motor
APC 10 x 5E Prop, 4mm tapered collet spinner driver and ESC
Battery: 2100mAh 3S1P-11.1V, MPUP5731
Radio: 4 channel with micro receiver
Servos: Four mini size, 2-Aileron, 1-Elevator, 1-Rudder
6" (152mm) Servo Extensions: Three for aileron servos
Misc. Items: Building and field equipment
SPECS: Wingspan: 36.2" (920mm)
Wing Area: 527 sq in (34 sq dm)
All Up Weight: 29.6oz (840g) approx, with recommended equipment
Wing Loading: 7.21 oz/sq ft (22g/sq dm) FAI (min)
Length: 36.2" (920mm)
Airfoil: Semi-symmetrical
Center of Gravity: Within the range of 2.9" (75mm) aft of the leading
edge nose of the top wing, molded-in dimples adjacent to the
cabane indicate correct balance point
Control Throws-
Elevator: Up and Down 0.47/0.39" (12/10mm) +/-
Rudder: Right to Left 0.79" (20mm)
Ailerons: Up & Down 0.63/0.47" (16/12mm) +/-
COMMENTS: No info is given on converting this model to glow power.
This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.
|
|
 |
 |
|
|
|
 |
 |
 |
