 |
 |
 |
 |
|
Product Detail |
 |
This is the glow powered, radio controlled, Almost-Ready-to-Fly
Heli-Max Kinetic 50 3D Helicopter.
FEATURES: Construction: Composite plastic main frame
Control System: Precision no-play swash plate with metal ball joints,
self-aligning clutch and 6mm feathering spindle
Engine Starting System: Reliable hex-type with self-aligning clutch
Drive System: Torque tube-driven tail-usually an expensive
aftermarket accessory
Main Rotor Blades: Constructed of wood, symmetrical airfoil, 23.6"
(600mm) long
Tail Boom: Constructed of aluminum, will accomodate main blades up to
24.4" (620mm)
Tail Section: Dual ball bearings in tail rotor grip and tail mounted
rudder servo
Canopy: Constructed of molded plastic, White in color with Brown
tinted windshield
Landing Gear: Wide stance heavy duty with aluminum skids
Fuel Tank: 17oz (500cc)
Warranty: Heli-Max guarantees this kit free from defects in both
material and workmanship at the date of purchase. Warranty does not
cover any component parts damaged by use or modification.
INCLUDES: Heli-Max Kinetic 50 3D ARF Helicopter with 600mm blades, decal sheet
fuel tank, fuel tubing, landing gear, windshield, canopy and
instruction manual
REQUIRES: Radio: 6-channel heli w/four standard ball bearing servos
Tail Servo: High speed and high torque servo for tail (if gyro does
not include servo)
Receiver Battery: 4.8V (2000mAh minimum) HCAM6321
Gyro: Heading hold
Engine: .46 - .51 cu in (7.5 - 8.0cc) heli engine, OSMG1951
Muffler: Century Silent Power .50 (CEHG3038)
Building and field equipment
SPECS: Rotor Diameter: 52.75" (1340mm)
Weight: 7.5lb (3402g)
Length: 47" (1194mm)
Width w/Landing Skids: 10" (255mm)
Height: 15.25" (387mm)
Gear Ratio: 9.1:1 main, 5:1 tail
COMMENTS: If replacement ball bearings are needed, order:
Qty Size Location Qty Bearing Set
Washout, Bellcranks
14 3x7x3mm Elevator Arm 1 HMXE7290
2 4x8x3mm Flybar 1 HMXE7291
1 10x19x5mm Main Shaft 1 HMXE7293
1 8x19x6 Main Frame 1 HMXE7298
4 3x10x4mm Tail Rotor 1 HMXE7292
4 6x10x3mm Tail Slider 2 HMXE7294
Collective Lever
2 5x13x4mm Tail Output Shaft 1 HMXE7295
4 5x11x4mm Output Shaft Spacer Tube 1 HMXE7297
|
|
 |
 |
|
|
|
 |
 |
 |
