 |
 |
 |
 |
|
Product Detail |
 |
This is the radio controlled, gasoline or glow powered, Almost Ready-to-Fly,
Great Planes Matt Chapman Cap 580 1/3 scale Airplane.
IMAA Legal 99.5" (2530mm) Wingspan.
Ideal for 3D aerobatics, IMAC competition and everyday sport flying.
For Advanced Modeler/Fliers.
FEATURES: Construction: Balsa and plywood
Wings: Two-piece all wood joined at fuselage with aluminum tube,
two locations in fuselage for tube placement allow easy center of
gravity adjustment
Covering: Top Flite MonoKote, color scheme is Yellow with splashes of
Blue, Orange, Green, Red and Purple, Red & White target graphic
on underside, see COMMENTS
Radio Compartment: Plywood reinforced, accessible under canopy
Cowling: Pre-painted, fiberglass-reinforced
Canopy: Single clear, with pre-painted pilot bust installed, canopy
is removable for easy access to radio equipment
Wheel Pants: Pre-painted, fiberglass-reinforced
Stabilizer: Two piece with aluminum joiners, stab halves remove
easily for transport
Landing Gear: .24" (6mm) thick painted and prebent aluminum with
1.5" (38mm) steerable tailwheel, .12" (3mm) diameter tail gear
Wheels: Two Dubro 4" (102mm) Treaded Lite, DUBQ0845
Spinner: 4" (102mm) aluminum
Aileron Control: Dual servo on each wing
Rudder Control: Dual servo
Building Time: Ready to fly in 15-20 hours, approximately
Fuel Tank: 32oz (960cc) (approximately)
Engine Mount: Plywood, integrated with fuselage (available only with
replacement fuselage)
Hardware: Premium heavy-duty, all hinges, control horns and pushrods
are included
Warranty Period: Great Planes Model Manufacturing guarantees this kit
free from defects in both material and workmanship at date of
purchase. This warranty does not cover any component parts damaged
by use or modification
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent .24" (6mm) thick main landing gear, .12" (3mm) tailwheel
wire 4" (102mm) main wheels, 1.5" (38mm) tailwheel, engine mount,
32oz (960cc) fuel tank, 4" (102mm) aluminum spinner, two decal
sheets, hardware package, photo-illustrated instructions, photo-
printed instrument panel and pilot bust
REQUIRES: Engine: 4.2-7.2 cu in (70-120cc) glow or gasoline,
Desert Aircraft 100 tested and recommended (not carried). As of
this writing 3/14/05, we do not stock an engine that meets the
requirements necessary to fly this model.
Muffler: Stock muffler supplied with engine, engine mounts at 90°
angle and exhaust exits through bottom of cowl
Radio: 4-6ch, at least 6-ch for any 3D aerobics
Servos: Two giant scale high torque (at least 150 oz-in) for rudder
Six standard size (at least 90 oz-in) high torque
One-two standard size (throttle and kill switch if needed)
6" (152mm) Servo Extensions: Two for outer aileron servos
12" (300mm) Servo Extensions: Two, receiver to each wing
24" (610mm) Servo Extension: One for rudder servos
36" (914mm) Servo Extension: One for elevator servos
Y Harnesses: Three for inner aileron servos and rudder servos
Misc. Items: ½" foam rubber padding, fuel tubing, fuel filter,
propeller, building and field equipment.
SPECS: Wingspan: 99.5" (2530mm)
Wing Area: 1885 sq in (121.6 sq dm)
Weight: 29-32lb (13.2-14.54kg)
Wing Loading: 35-39 oz/sq ft (107-119 g/sq dm)
Length: 95" (2415mm)
Airfoil: Fully symmetrical low-wing placement
Center of Gravity: 3½" (89mm) Back from the wing's leading edge AT
THE WINGTIP, NOT THE FUSELAGE
Control Throws- High Rate Low Rate
Elevator: Up & Down 1-1/8" (28mm) 7/8" (22mm)
Rudder: Right to Left 3" (76mm) 2" (51mm)
Ailerons: Up & Down 1-3/4" (44mm) 1-3/8" (35mm)
For all out 3D, set the throws as high as possible without binding.
COMMENTS: Following are the colors of MonoKote used and order numbers for 6'
rolls;
Red TOPQ0201 Purple TOPQ0225
Cub Yellow TOPQ0220 Blue TOPQ0206
Orange TOPQ0202 Sapphire Blue TOPQ0227
Green TOPQ0214 White TOPQ0204
Black TOPQ0208
Replacement Parts List;
Wing Set GPMA2650 Cowl GPMA2656
Fuselage GPMA2651 Hatch/Canopy GPMA2657
Stab/Elevator Set GPMA2652 Landing Gear GPMA2658
Stab/Joiner Tubes GPMA2653 Wheel Pants GPMA2659
Rudder GPMA2654 Spinner GPMA2660
Wing Joiner Tube GPMA2655 Instrument Panel GPMA2661
Decal Set GPMA2663 Main Wheels DUBQ0845
Tailwheel Assembly (without wheel) GPMA2662
|
|
 |
 |
|
|
|
 |
 |
 |
|
|
