 |
 |
 |
 |
|
Product Detail |
 |
This is the Futaba 12FGH Transmitter and R6014FS 14-ch Receiver with the 2.4GHz FASST system.
This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard **For European Standard Mode 1-Right Hand Throttle and Left Hand Elevator** **order FUTK9278**
If your transmitter's region code is something other than the United States,the TM-14 Module sold in the United States is not compatible with this transmitter. As such, it is necessary to purchase the TM-14 module which matches the region code of the transmitter.
**Additional Technical Info Will Be Added When It Becomes Available.**
When you improve upon all of the best that Futaba 2048 technology has to offer,you have the 12FG-one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memory for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you.
Contains software for airplanes, helicopters and gliders. This is the helicopter version which will default to helicopter settings, with mode 2 stick operation and does not have a ratcheted throttle.
For the latest information about the 12MZ visit the manufacturer's web page at www.2.4gigahertz.com. Some of the system's most impressive highlights include the following:
Features
Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conflicts and
interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands
from this transmitter-with over 134 million possible codes there is no chance for a conflict
No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting
the antenna on a conventional transmitter
Purpose built custom IC chips for key functions; no off-the-shelf IC chips
Digital trims on all 4 main channels
Ergonomic rubber grips
Quad-bearing gimbals
Ultra-precise tuning in .5% increments
255X196 LCD scren with adjustable contrast
One year limited warranty
Programming Features
Thirty model memory
Programming for airplane, glider and helicopter models
Supports 13 wing types, 3 tail types and 8 heli swash tupes
Eight flight conditions
Variable dual rates
Servo grouping for servo synchronization
Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating
Stick Mode-Choose from Mode 1-Mode-4
Twenty-seven pre-programmed mixes, with built-in shortcuts
Three swashplate types
Five-Point Normal and Idle Up Throttle/Pitch Curves
Revo, Gyro and Swash to Throttle mixing
Swash AFR Adjustable Function Rate for use w/ 3S or 3E swash types
Specifications
Transmitter
Power Supply: 7.2V
Receiver
Power Requirement: 4.8 - 6V
Package Contents
Futaba 12FGH Transmitter
7.2V 1700mAh NiMH Transmitter Battery
1500mAh NiCd Receiver Battery
R6014FS Receiver, FUTL7644
Heavy-Duty Switch Harness
Futaba Orange Transmitter Neck Strap
|
|
 |
 |
|
|
|
 |
 |
 |
