 |
 |
 |
 |
|
Product Detail |
 |
This is the Mode 1 Helicopter Version Futaba 10CG Transmitter
and R6014FS 14-ch Receiver with the
2.4GHz FASST system.
No Servos Included
**Additional Technical Info Will Be Added When It Becomes Available.**
This version is Mode 1
**For USA Standard Mode 2 order FUTK9256**
This heli version will default to helicopter settings,
with mode 2 stick operation when powered up and has a non-ratcheted
throttle stick.
FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one
or two frequencies
Dual antenna diversity enables FASST system to automatically and
seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under
constant control of transmitter regardless of altitude
Graphics for programming swash plate types, swash ring and logic
switches allowing timer activation or other function just by
changing positions of specific sticks or functions
6 programmable heli mixes
Hover/pitch
Hover throttle
8 swash plate types with graphics
Swash AFR
5 point revo mixing
Gyro menu
7 point throttle and pitch curves with delay
High/low pitch setting
Throttle hold and three idle-ups with delay
One year limited warranty
INCLUDES: Futaba 10C Transmitter with Module
NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
NR4J 600mAh NiCd Receiver Battery, FUTM1280
FBC-19B RX, TX Wall Charger, FUTM1830
R6014FS Receiver, FUTL7644
Switch Harness
8" (203mm) Servo Extension
Neck Strap, FUTM5690
REQUIRES: Servos depending on type of aircraft
SPECS: Transmitter;
Power Supply: 9.6V NT8S700B NiCd battery
Receiver;
Receiving Frequency: 2.4GHz
Power Requirement: 4.8 - 6V
Current Drain: 70mA
Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
Weight: 0.72oz (20.8g)
COMMENTS: This radio is available in the following default modes;
Air Mode 2, FUTK9255
Heli Mode 2, FUTK9256
Air Mode 1, FUTK9257
Heli Mode 1, FUTK9258
This system can also be operated on 72MHz by purchasing the
Transmitter Antenna (FUTM5110), and the 72MHz Module (FUTL1516)
and using a compatible receiver.
|
|
 |
 |
|
|
|
 |
 |
 |
