 |
 |
 |
 |
|
Product Detail |
 |
This is the Futaba Mode 1 Airplane Version
10CG Transmitter and R6014FS 14-ch Receiver with the
2.4GHz FASST system.
No Servos Included.
**Additional Technical Info Will Be Added When It Becomes Available.**
This version is Mode 1-Right Hand Throttle and Left Hand Elevator,
European Standard
**For USA Standard Mode 2-Left Hand Throttle and Right Hand Elevator**
**order FUTK9255**
This airplane version which will default to airplane settings,
with mode 1 stick operation when powered up and has a ratcheted throttle stick.
FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts
very quickly virtually eliminating signal conficts and
interruptions unlike other 2.4GHz systems that only stay on one
or two frequencies
Dual antenna diversity enables FASST system to automatically and
seamlessly select the best reception between the two antennas
built into the receiver ensuring that the aircraft stays under
constant control of transmitter regardless of altitude
7 point throttle and pitch curves
12 factory defined glider mixes
Logic switches allows timer activation or other function just by
changing positions of specific sticks or switches
15-model memory, expandable to 48 models with optional 128K CAMPac
module (FUTM9408)
10-character model and user naming
Assignable switches and dials/functions
2 proportional slider switches
Data transfer
Model select, copy, reset
Fail-safe, sub trims, servo reversing and EPA
160 x 72 backlit LCD with adjustable contrast
Servo monitor display
Auxilliary channel screen for 1-step function/switch assignment
One year limited warranty
INCLUDES: Futaba 10CG Transmitter with Module
NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
NR4J 600mAh NiCd Receiver Battery, FUTM1280
FBC-19B RX, TX Wall Charger, FUTM1830
R6014FS Receiver, FUTL7644
Switch Harness
8" (203mm) Servo Extension
Neck Strap, FUTM5690
REQUIRES: Servos depending on type of aircraft
SPECS: Transmitter;
Power Supply: 9.6V NT8S700B NiCd battery
Receiver;
Receiving Frequency: 2.4GHz
Power Requirement: 4.8 - 6V
Current Drain: 70mA
Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
Weight: 0.72oz (20.8g)
COMMENTS: This radio is available in the following default modes;
Air Mode 2, FUTK9255
Heli Mode 2, FUTK9256
Air Mode 1, FUTK9257
Heli Mode 1, FUTK9258
This system can also be operated on 72MHz by purchasing the
Transmitter Antenna (FUTM5110), and the 72MHz Module (FUTL1516)
and using a compatible receiver.
|
|
 |
 |
|
|
|
 |
 |
 |
