 |
 |
 |
 |
|
Product Detail |
 |
Futaba Mode 2 Airplane Version 10C Transmitter and R6014FS 14-ch Receiver with the 2.4GHz FASST system. No Servos Included. FUTK9250
This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard
**For European Standard Mode 1-Right Hand Throttle and Left Hand Elevator, order FUTK9252
This airplane version which will default to airplane settings, with mode 2 stick operation when powered up and has a ratcheted throttle stick.
Features
Futaba 10C R6014FS Air FASST 2.4G No Servos Mode 2 FUTK9250
Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conflicts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude
Pre-Vision Packet Screening technology scans incoming data for potential problems and applies sophisticated error correction techniques for solid impenetrable link with model
Easy Link system features a unique ID code in the transmitter that links to the receiver insuring that receiver only follows commands from this transmitter-with over 134 million possible codes there is no chance for a conflict
No hassle Fail Safe programmed through transmitter-no complicated set-up steps or binding plugs
When performing a ground check, the Power Down function allows modeler to reduce power from up to 50+ paces away-like retracting the antenna on a conventional transmitter
Purpose built custom IC chips for key functions; no off-the-shelf IC chips
One year limited warranty
Specifications: Futaba 10C Transmitter
Power Supply: 9.6V NT8S700B NiCd battery
Specifications: Futaba R6014FS Receiver FUTL7644
Receiving Frequency: 2.4GHz
Power Requirement: 4.8 - 6V
Current Drain: 70mA
Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm)
Weight: 0.72oz (20.8g)
Package Contents
Futaba 10C Transmitter with Module
NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460
NR4J 600mAh NiCd Receiver Battery, FUTM1280
FBC-19B RX, TX Wall Charger, FUTM1830
R6014FS Receiver, FUTL7644
Switch Harness
8" (203mm) Servo Extension
Neck Strap, FUTM5690
|
|
 |
 |
|
|
|
 |
 |
 |
