 |
 |
 |
 |
|
Product Detail |
 |
Features
Futaba 12FGA 12-Channel PCM/R5114DPS Rx 50MHz Mode 2 FUTJ9205
PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM
10 free (user programmable) mixes
24 preset model types, 8 heli swash types and 16 model types for fixed wing aircraft
6 types of no tail wing (winglet) in each airplane and glider
Supports eight flight conditions (seven plus the default)
FLASH-ROM memory for up to thirty models
1882 model memory available with optional 1GB SD Card available separately,
Six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration
Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required
Dual Antenna Diversity (DAD)
"Full Functionality" trainer system
255 x 96 LCD with adjustable contrast
7.2V 1700mAh NiMH transmitter battery
R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may occur Mode B (new Mode) may be selected
By using state-of-the-art Ball Grid Array (BGA) layered PC board technology, this 14-channel synthesized receiver is the world's smallest. All pilots will appreciate how easy its
WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals.
Servo Grouping;
Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing. Each servo's EPA can be adjusted individually from the transmitter-no separate servo synchronizer requires for mixing
Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable
Front mounted slider switches for easier access
Seven color LED indicator
Package Contents
12FGA Synthesized Transmitter (not available separately)
50MHz Module
R5114DPS 50MHz Receiver (FUTL7710)
7.2V 1700mAh NiMH Transmitter Battery (FUTM1480)
Battery Charger (FUTM1805)
NiCd 1500mAh 4.8V Receiver Battery
Heavy Duty Switch Harness
Woven Orange Neck Strap (FUTM5693)
Instruction Manual
Specification
Transmitter; Operating System: 2-stick, 12 channels, PCM-G3 synthesizer system Modulation: PCM-G3, PCM 1024, or FM/PPM switchable Power Supply: Current Drain:
R5114DPS Receiver; Receiving Frequency: US only 72 or 50MHz bands Intermediate Frequency: 10.7MHz & 450kHz Power Requirement: 4.8V NiCd battery Current Drain: 75mA Size: 2" x 1.5" x .65" (52mm x 37.5mm x 16.5mm) Weight: 1.16oz (33g)
Requirements
SD Memory Card (not carried, can be purchased at electronics store) for downloading software updates
Charging batteries before use
Servos of modeler's choice, suggested servos for use with the 12FGA include the Futaba S9154 Digital High Speed Servo (FUTM0214) and the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)
Comments
Available in Mode 1 or Mode 2, for airplanes and helis, on 72MHz and 50MHz
FUTJ9200 Airplane 72MHz Mode 2
FUTJ9201 Heli 72MHz Mode 2
FUTJ9205 Airplane 50MHz Mode 2
FUTJ9206 Heli 50MHz Mode 2
FUTJ9210 Airplane 72MHz Mode 1
FUTJ9211 Heli 72MHz Mode 1
The only chargers that will work with the 12FG is FUTM1805 or FUTM4160 (this charger requires charge lead FUTM4236).
|
|
 |
 |
|
|
|
 |
 |
 |
