 |
 |
 |
 |
|
Product Detail |
 |
Features
Futaba 12FGA 12-Channel PCM/R5114DPS Rx 72MHz Mode 2 FUTJ9200
PCM G3 2048 resolution is "backwards compatible" with 1024 PCM, and FM/PPM
10 free (user programmable) mixes
24 preset model types, 8 heli swash types and 16 model types for fixed wing aircraft
6 types of no tail wing (winglet) in each airplane and glider
Supports eight flight conditions (seven plus the default)
FLASH-ROM memory for up to thirty models
8-charcter model naming
1882 model memory available with optional 1GB SD Card available separately,
Six factory-set Variable Dual Rate (VDR) curves can be assigned to any function in any flight condition configuration
Variable Dual Rates (VDR) and Expo can be combined so they are automatically activated when a function is activated, no program mixing required
Dual Antenna Diversity (DAD)
"Full Functionality" trainer system
255 x 96 LCD with adjustable contrast
7.2V 1700mAh NiMH transmitter battery
R5114DPS Receiver;
Operates in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may occur Mode B (new Mode) may be selected By using state-of-the-art Ball Grid Array (BGA) layered PC boardtechnology, this 14-channel synthesized receiver is the world's smallest. All pilots will appreciate how easy its WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals.
Servo Grouping;
Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing. Each servo's EPA can be adjusted individually from the transmitter-no separate servo synchronizer requires for mixing
Quad-Bearing Gimbals for smoothest motion and response, stick tension and detent are adjustable
Front mounted slider switches for easier access
Seven color LED indicator
Package Contents
12FGA Synthesized Transmitter (not available separately)
72MHz Module
R5114DPS 72MHz Receiver (FUTL7708)
7.2V 1700mAh NiMH Transmitter Battery (FUTM1480)
Battery Charger (FUTM1805)
NiCd 1500mAh 4.8V Receiver Battery
Heavy Duty Switch Harness
Woven Orange Neck Strap (FUTM5693)
Instruction Manual
Specification
Transmitter; Operating System: 2-stick, 12 channels, PCM-G3 synthesizer system Modulation: PCM-G3, PCM 1024, or FM/PPM switchable
R5114DPS Receiver; Receiving Frequency: US only 72 or 50MHz bands Intermediate Frequency: 10.7MHz & 450kHz Power Requirement: 4.8V NiCd battery Current Drain: 75mA Size: 2" x 1.5" x .65" (52mm x 37.5mm x 16.5mm) Weight: 1.16oz (33g)
Requirements
SD Memory Card (not carried, can be purchased at electronics store) for downloading software updates
Charging batteries before use
Servos of modeler's choice, suggested servos for use with the 12FGA include the Futaba S9154 Digital High Speed Servo (FUTM0214) and the Futaba S9255 Hi-Torque Heli Digital Servo (FUTM0225)
|
|
 |
 |
|
|
|
 |
 |
 |
