 |
 |
 |
 |
|
Product Detail |
 |
This is the 1/10 scale electric powered, radio controlled, ready to run Tamiya Lamborghini Countach LP500S On-Road Car. For modelers 14 years of age and older.
Features
Tamiya 1/10 Expert Built Lamborghini Countach LP500S 57780
Chassis: TT-01 type E with shock tower now molded separately from the gear case covers and new upper deck with transponder mount new A parts (Uprights) made of polycarbonate plastic material new D parts (upper deck, motor cover and more) made of fiberglass- reinforced nylon material
Drive: Four wheel shaft drive
Motor: 540 size with pre-attached leads
Radio: Tamiya Expec SP 27MHz 2-channel pistol grip with standard steering servo
Electronic Speed Control: Tamiya TEU-101BK, TAMM3194
Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights, see COMMENTS
Shocks: Friction, not oil-filled, composite body
Gearbox: Sealed front and rear
Differentials: Bevel gear
Transmission: Single speed
Tires: Radial type 1.02" (26mm) wide, 2.48" (63mm) diameter
Wheels: Silver colored plastic 1.02" (26mm) wide, 2.04" (52mm) diameter
Body: Lightweight polycarbonate, mirrors, rear wing and metal plated light cases are separately molded parts (headlights are molded in the down position and do not pop up)
Bumpers: Foam front bumper
Suspension: Four wheel independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Steering: Bell-crank TA-05 type with servo saver
Servo Saver: Included
Specifications
VEHICLE-
Length: 16.8" (427mm)
Width: 7.4" (187mm)
Height: 4.4" (111mm)
BODY-
Length: 17.5" (446mm) including wing
Width: 6.9" (175mm)
Height: 4" (105mm)
Contents
Tamiya Lamborghini Countach LP500S On-Road Car with friction shocks, 540 motor, electronic speed control, body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions, 2-channel radio, LED light unit
Requirements
Radio: 2-channel with one steering servo
Battery: 6 cell stick pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Comments
The TLU-02 Light Control Unit (not included) can be installed for more light effects, order TAMC1477.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
12 5x11mm front & rear diff gears, hubs 6 DTXC1547
4 8X12mm front & rear diff gears 2 DTXC1597
Body is painted with Tamiya PS-2 Red, TAMR8602.
|
|
 |
 |
|
|
|
 |
 |
 |
