 |
 |
 |
 |
|
Product Detail |
 |
Features
HPI Racing Savage Flux HP 1/8 Brushless Truck RTR 100646
Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098" (2.5mm) thick, extra low CG for high degree of control and cornering ability, included wheelie bar, twin battery boxes hold a variety of battery types
Drive: Four wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm shaft, handles up to 25V of power, held in place with two machined 8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet aluminum motor mount
Radio: HPI 27MHz TF-3 2-channel with HPI SF-5 high-torque metal gear steering servo
Electronic Speed Control: HPI Flex Blur with reverse, programmable, integrated cooling fan and up to 6S LiPo battery handling capability
Transmission: All metal gears running on rubber-sealed ball bearings
Differential: Equipped with machined super heavy duty bevel gears, upgradeable with all nitro Savage option parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights designed for the larger tires and weight of the
Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm) diameter
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide
Shocks: Big Bore nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Body: Trimmed and painted GT-2
Specifications
VEHICLE-
Length: 21" (533mm)
Width: 16.8" (427mm)
Height: 10" (254mm)
Front and Rear Track: 16" (406mm) outer edges of tires, side to side
Front and Rear Tread: 13.1" (332.5mm) center of tires, side to side
Wheelbase: 13.6" (345mm)
Body-
Length: 19.2" (487mm)
Width: 8.5" (216mm)
Height: 5" (127mm)
Contents
Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork 2200 brushless motor, Flux Blur ESC, HPI TF-3 radio system, SF-5 high torque metal gear steering servo, painted & trimmed body, wheelie bar, instruction manual and HPI RC Cars DVD
Requirements
AA Batteries: Eight for transmitter
Batteries: Two NiMH (up to 8-cell flat type packs) or 2S or 3S LiPo battery packs (both batteries must be the same type, voltage and capacity)
Battery Charger: Depending on type of batteries selected
Building and track equipment
|
|
 |
 |
|
|
|
 |
 |
 |
