 |
 |
 |
 |
|
Product Detail |
 |
This is the electric powered, radio controlled, ready to run
1/16 scale Traxxas Slash Short-Course Racing Truck with Brushed Motor.
FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
Drive: Four wheel
Radio: Traxxas TQ 2-channel 27MHz AM with waterproof digital high-
torque steering servo, waterproof receiver box, transmitter does
not have charge jack
Electronic Speed Control: Traxxas XL-2.5 waterproof, three throttle
profiles, 6-8 cell NiMH compatibility and built-in BEC
Motor: Titan 380
Spur Gear: 45 tooth
Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery (see below)
Battery: Traxxas Power Cell with Traxxas connector
Battery Charger: 110V wall type
Body: Painted and trimmed with applied decals-Scott Douglas/Mike
Oberg edition AmsOil graphics
Bumpers: Front and rear, composite construction
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable Torque-Control
slipper clutch
Differentials: Sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1" (26mm) wide, 2.6" (67mm)
diameter
Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)
diameter, standard size 12mm hex
Steering: Steering arm with spring loaded servo protection
INCLUDES: RTR Traxxas Slash Short-Course Racing Truck with 2-ch radio, ESC,
painted body, 6-cell battery, charger, extra pinion gear, brushed
motor and instruction manual
REQUIRES: AA Cells: Eight for transmitter
SPECS: Vehicle-
Length: 14" (356mm)
Width: 7.3" (185mm)
Height: 4.92" (125mm)
Front and Rear Track: 7.3" (185mm) distance between outer edges of
wheels
Wheelbase: 8.1" (206mm)
Ground Clearance: 1.5" (38mm)
Body-
Length: 13.4" (340mm)
Width: 7.1" (180mm) at rear wheels, widest point
5.7" (146mm) behind front wheels, narrowest point
Height: 3.4" (86mm)
COMMENTS: The ball bearings in the 1/16 Traxxas Slash are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511
|
|
 |
 |
|
|
|
 |
 |
 |
