 |
 |
 |
 |
|
Product Detail |
 |
This is the electric powered, radio controlled, ready to run
1/16 scale Traxxas Slash VXL Short-Course Racing Truck.
FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
Drive: Four wheel
Radio: Traxxas TQ 2-channel 27MHz AM with waterproof digital high-
torque steering servo, waterproof receiver box, transmitter does
not have charge jack
Electronic Speed Control: Traxxas VXL-3m waterproof, with high-
current connector, training mode, reverse and low voltage
detection for use with 2S and 3S LiPo packs
Motor: Traxxas Velineon 380 brushless motor with Neodymium magnets,
sintered rotor and high RPM ball bearings, 3.5mm gold plated bullet
connectors
Spur Gear: 45 tooth
Pinion Gear: 31 tooth 48 pitch, extra pinion gear included for 50+
MPH operation with extra battery (see below)
Battery: One Traxxas Power Cell 6-cell stick NiMH with high current
connector, dual battery capability (extra battery (TRAC2925) and
series adapter (TRAP3063) not included and must be purchased
separately), vehicle is also compatible with 2S and 3S LiPo packs
(not included) LiPo mode on ESC must be selected
Battery Charger: 110V wall type
Body: Painted and trimmed with applied decals
Bumpers: Front and rear, composite construction
Shocks: GTR oil filled
Suspension: Revo-spec rocker actuated long travel inboard type with
telescoping universal joint shafts
Transmission: Ball bearing equipped with adjustable slipper clutch
Differentials: Sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Non-adjustable
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Multi terrain, with foam inserts 1" (26mm) wide, 2.6" (67mm)
diameter
Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)
diameter, standard size 12mm hex
Steering: Steering arm with spring loaded servo protection
INCLUDES: RTR Traxxas Slash VXL Short-Course Racing Truck with 2-ch radio, ESC,
painted body, 6-cell battery, charger, extra pinion gear, brushless
motor and instruction manual
REQUIRES: AA Cells: Eight for transmitter
SPECS: Vehicle-
Length: 14" (356mm)
Width: 7.3" (185mm)
Height: 4.92" (125mm)
Front and Rear Track: 7.3" (185mm) distance between outer edges of
wheels
Wheelbase: 8.1" (206mm)
Ground Clearance: 1.5" (38mm)
Body-
Length: 13.4" (340mm)
Width: 7.1" (180mm) at rear wheels, widest point
5.7" (146mm) behind front wheels, narrowest point
Height: 3.4" (86mm)
COMMENTS: The ball bearings in the Traxxas Slash VXL are rubber sealed.
Following are the stock numbers for the replacement bearings from
Traxxas and non-rubber sealed alternatives from Duratrax;
Qty. Size Location Qty. Bearing Set
2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
2 5x8mm Steering Bellcrank 1 DTXC1523
2 4x7mm Rocker Arm Post 2 DTXC1507
4 8x12mm Differentials 2 TRAC7020 DTXC1581
4 4x8mm Differentials 2 TRAC7019 DTXC1511
6 4x8mm Transmission 3 TRAC7019 DTXC1511
2 4x8mm Rear Ring Gear 1 TRAC7019
|
|
 |
 |
|
|
|
 |
 |
 |
