 |
 |
 |
 |
|
Product Detail |
 |
Features
DuraTrax 1/14 Cliff Climber RTR 27MHz DTXD18**
Chassis: 0.08" (2mm) thick anodized aluminum vertical plates, gun metal gray in color
Drive: Four wheel with a solid spool to lock the axles to ensure maximum traction, hardened steel axles and drive shaft
Radio: Tactic 2-channel pistol grip with two TSX-200 standard servos
Electronic Speed Control: 16.8V dual motor, dual battery capability
Motors: Two 380 size with low RPM for climbing
Pinion Gears: 11 tooth
Main Gears: 45 tooth
Shocks: Oil filled, adjustable, aluminum caps
Body: Prepainted and trimmed scale rock crawler body
Tires: 4.25" (108mm) diameter, 2" (51mm) wide extra soft compound for high traction, low rebound foam inserts
Wheels: 2.3" (59mm) diameter, 1.6" (40mm) wide, gray in color with 12mm hex mounts that are compatible with 1/10 scale wheels
Steering: Four wheel with servos equipped with servo savers mounted on front and rear axles
Bumpers: Front and rear plastic
Camber and Caster: Non-adjustable
Specifications
Vehicle-
Length: 14.2" (360mm)
Width: 9" (230mm)
Height: 7.9" (200mm)
Wheelbase: 9.5" (240mm)
Ground Clearance: 3.5" (90mm)
Body-
Length: 11.4" (289mm)
Width: 5.7" (146mm)
Height: 3.9" (100mm)
Contents
Fully assembled 1/14 scale Cliff Climber Rock Crawler, 2-ch radio ESC, body, two motors, decals and illustrated instruction manual
Requirements
AA Batteries: 8 for transmitter, SANP3501
Batteries: Two 6-cell NiMH 2/3A batteries
Battery Charger: For NiMH batteries, DTXP4240
Frequencies
The Cliff Climber is available in the following body colors and radio channels;
Green/Tan ch A1 DTXD18A1
Blue/Gray ch A2 DTXD18A2
Red/Gray ch A3 DTXD18A3
Orange/Gray ch A4 DTXD18A4
Brown/Tan ch A5 DTXD18A5
Blue/Cyan ch A6 DTXD18A6
Comments
Also available in an Almost Ready to Run version requiring radio, ESC, wire harness and paint, DTXC0018.
To upgrade to Ball Bearings, order DTXC1099.
|
|
 |
 |
|
|
|
 |
 |
 |
