 |
 |
 |
 |
|
Product Detail |
 |
Features
DuraTrax 1/18 Mini Quake RTR DTXD11**
Chassis: Composite tub style with countersunk screws
Drive: Four wheel shaft drive
Motor: 380 size motor (DTXC3307)
Radio: 2-channel AM pistol grip made by Futaba with steering and throttle trim, adjustable steering rate, charge jack for optional NiCd batteries, battery LED and one SX100 servo for steering
Ball bearings: Full set included, 14 total
Shocks: Eight oil filled with Black composite bodies
Gearbox: Sealed front and rear
Tires: 2.60" (65mm) diameter, 1.4" (36mm) wide rubber
Wheels: Five spoke White plastic construction
Speed Control: High-Frequency ESC5000 Electronic Speed Control with forward and reverse (no brake)
Micro RS4/Mini-T style connector (DTXM1260)
Bumpers: Front and rear Black plastic with skidplates
Suspension: Fully independent
Camber Tie Rods: Fixed
Steering Tie Rods: Fixed non-adjustable,
Servo Saver: None
Six cell 600mAh NiCd battery pack (DTXC2196)
200mAh wall charger (DTXP4080)
Warranty Period: 90 days except for parts covered by the Stress-Tech
Guarantee. Stress-Tech parts have a one year warranty.
Specifications
Vehicle-
Length: 9.5" (240mm)
Width: 7.4" (185mm)
Height: 4.7" (120mm)
Weight: 25oz (725g) approx.
Wheelbase: 6.5" (166mm)
Tread: Front-5.6" (143mm) Rear-5-5/8" (143mm)
Front Track: 7.2" (182mm)
Rear Track: 7.2" (182mm)
Ground Clearance: 1.5" (32mm)
BODY-
Length: 8.8" (223mm)
Width: 3" (70mm)
Height: 2.25" (55mm)
Contents
Duratrax Mini Quake with eight oil-filled shocks, 380 motor, Electronic Speed Control, painted body, tires, wheels, 6-cell 600mAh, NiCd made with AE size cells, 16 tooth pinion gear, 46 spur gear, decals, 2-channel radio, eight AA batteries, 200mAh wall charger, decals and instruction manual.
Requirements
Installation of the 8 AA batteries in the transmitter, charging the included battery pack with included wall charger for three hours.
Misc. Items: Building and track equipment
Frequencies
DTXD1162 GREEN
DTXD1164 BLUE
DTXD1168 RED
DTXD1170 ORANGE
DTXD1172 WHITE
DTXD1174 PURPLE
Comments
The Mini Quake is also available in a prebuilt version DTXC0011, that has a clear body and does not include radio, speed contol, battery or charger. The prebuilt version includes hop-ups such as front and rear ball diffs and aluminum CV driveshafts, adjustable tie-rods and chrome finish wheels.
For Replacement Ball Bearings use:
All 14 bearings in this model are 6x10mm. Use stock number DTXC1561 if you need replacement bearings.
|
|
 |
 |
|
|
|
 |
 |
 |
