 |
 |
 |
 |
|
Product Detail |
 |
This is the 1/10 scale electric powered, radio controlled, ready to run Team Associated RC10B4 RS (Race Spec) off-road buggy kit. It is not possible to request a specific radio channel or color when ordering because they are supplied by the manufacturer at random.
Features
Associated B4RS Race-Spec RTR 9037
Chassis: All-new molded composite, low center of gravity
Transmission: 2.6:1 laydown type, high-torque capacity
Bearings: Full set shielded, 14 total
Shocks: Oil-filled hard anodized aluminum
Radio: 27MHz AM Team Associated XP 2 with throttle ATV, steering and throttle trim and reverse, metal gear steering servo, transmitter does not have charge jack
Speed Control: LRP Ai digital with reverse and auto setup
Motor: Team Associated Reedy Radon 17 turn with composite impact resistant motor guard
Dog Bones: CVD dog bones designed into rear suspension to push the B-4 out to the maximum width for more traction
Front Tires: Proline M3 racing compound "wide-body" 1" (26mm) wide, 3.2" (82mm) diameter
Rear Tires: Proline M3 racing compound, 1.8" (45mm) wide, 3.4" (86mm) diameter
Front Wheels: Proline Velocity white 0.94" (24mm) wide, 2.4" (61mm) diameter
Rear Wheels: Proline Velocity white 1.5" (38mm) wide, 2.4" (61mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Suspension: Symmetrical suspension arm design with all four arms the same length, captured hinge pins-no E-clips
Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel
Body: Painted Proline buggy style with adjustable clear rear wing color scheme is either red or blue with yellow flames, see COMMENTS
Forward-swept front end design provides maximum front end ground clearance
Slipper Clutch: High-torque capacity double-sided provides finer adjustment
Battery Position: Adjustable with new style battery hold down strap
Built-in servo saver
Specifications
Vehicle:
Length: 365mm (14.375")
Rear Track: 254mm (10")
Front Track: 248mm (9.75")
Height: 108mm (4.25")
Wheelbase: 270mm (10.625") adjustable
Ground Clearance: 25.4mm (1")
Contents
One pre-assembled RC10B4 RS buggy kit with oil-filled shocks, tires, foam inserts, wheels, 81 tooth spur gear, steel turnbuckles, 23 tooth pinion gear, 17 turn motor, electronic speed control, 2-ch pistol grip AM radio w/steering servo, painted body, clear _ rear spoiler, decals and photo-illustrated manual
Requirements
Radio Batteries: (8) AA size
Battery Pack: Six cell flat with standard connector
AC/DC Charger: Timed or peak for 6-cell battery
Miscellaneous building and field equipment
|
|
 |
 |
|
|
|
 |
 |
 |
