 |
 |
 |
 |
|
Product Detail |
 |
Features
DuraTrax 1/14 Cliff Climber Prebuilt DTXC0018
Chassis: 0.08" (2mm) thick anodized aluminum vertical plates, gun metal gray in color
Drive: Four wheel with a solid spool to lock the axles to ensure maximum traction
Motors: Two 380 size with low RPM for climbing
Shocks: Oil filled, adjustable, aluminum caps, composite body
Body: Clear scale rock crawler polycarbonate body
Tires: 4.25" (108mm) diameter, 2" (51mm) wide extra soft compound for high traction, low rebound foam inserts
Wheels: 2.3" (59mm) diameter, 1.6" (40mm) wide, gray in color with 12mm hex mounts that are compatible with 1/10 scale wheels
Steering: Four wheel with servo savers that must be installed on front and rear axles
Camber and Caster: Fixed, non-adjustable
Specifications
Vehicle-
Length: 14.2" (360mm)
Width: 9" (230mm)
Height: 7.9" (200mm)
Wheelbase: 9.5" (240mm)
Ground Clearance: 3.5" (90mm)
Body-
Length: 11.4" (289mm)
Width: 5.7" (146mm)
Height: 3.9" (100mm)
Contents
Duratrax 1/14 scale Cliff Climber Rock Crawler, clear trimmed body decals, illustrated instruction manual and two 380 size motors
Requirements
Radio: 2-channel with two standard servos, FUTJ14**
Battery Adapters: Two, standard to mini, DTXC2210
Electronic Speed Control: For dual motor/dual battery use, DTXM1280
AA Batteries: 8 for transmitter, SANP3501
Batteries: Two 6-cell NiMH 2/3A batteries
Battery Charger: For NiMH batteries, DTXP4240
Paint: Polycarbonate safe spray or brush-on
Comments
The Cliff Climber is also available in a ready to run version including radio ESC, wire harness and painted body, DTXD18**.
|
|
 |
 |
|
|
|
 |
 |
 |
