 |
 |
 |
 |
|
Product Detail |
 |
This is the 1/10 scale electric powered, radio controlled, 2 wheel drive Associated RC10 B4 Factory Team off-road buggy kit. Includes Over $150 worth of Factory Team upgrades.
Features
Associated RC10B4 Factory Team Buggy Kit 9035
Construction: Molded carbon chassis, front and rear shock towers, front and rear A-arms, chassis brace and top plate, woven carbon fiber battery strap
Transmission: 2.6:1 laydown type, high-torque capacity
Bearings: Full set PTFE sealed
Shocks: PTFE coated oil-filled hard anodized threaded aluminum .89" and 1.18" shock bodies with unobtainium .71" and 1.02" shock shafts
Dog Bones: MIP CVDs
Front Tires: Pro-Line M3 Wide 4 rib
Rear Tires: Pro-line M3 Holeshot
Wheels: Pro-line white (dyeable) dish
Caster: Fully-adjustable, caster describes the angle of the kingpin as it leans toward the rear of the vehicle
Camber: Fully-adjustable, camber describes the angle at which the tire and wheel sit when viewed from the front
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Blue anodized axles which now use a bolt to retain each wheel (center drilled axles)
Factory Team: Blue steel body clips, blue anodized aluminum milled motor plate, wheel spacers, ball end washers, servo mounts, wheel spacers, shock pivot balls and front hinge pin brace
Lightweight differential outdrives
Clear Proline buggy body with adjustable rear wing
Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel
Forward-swept front end design provides maximum
front end ground clearance
High-Torque capacity double-sided slipper provides finer adjustment
Impact-resistant rear motor guard and wing mounts
Adjustable battery position
Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring
"Factory Team" sticker
Specifications
Vehicle:
Length: 365mm (14.375")
Rear Track: 254mm (10")
Front Track: 248mm (9.75")
Height: 108mm (4.25")
Wheelbase: 270mm (10.625")
Ground Clearance: 25.4mm (1")
Contents
One Associated RC10B4 Factory Team buggy kit with oil-filled shocks, tires, foam inserts, wheels, titanium turnbuckles, Factory Team parts and photo-illustrated manual
Requirements
2ch radio with one servo
Radio Batteries: (8) AA size
Pinion Gear: # of teeth to be determined by motor, see COMMENTS
Motor: Stock or modified
Six cell flat battery pack with standard connector
AC/DC charger timed or peak for 6-cell battery
Miscellaneous building and field equipment
|
|
 |
 |
|
|
|
 |
 |
 |
