 |
 |
 |
 |
|
Product Detail |
 |
Team Associated is proud to release the RC8Te, a 1:8 scale electric- powered competition truggy kit based on the championship-winning RC8T platform! The RC8Te engineering team has developed a practical design that incorporates the same exceptional strength, durability, cornering capability, jumping ability, and rough track handling that characterize the nitro-powered RC8T.
Features
Associated RC8TE 1/8 4WD Electric Truggy Kit 80911
Molded battery tray supports two ROAR-approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
Receiver box, servo, and battery tray remove from car in one piece for easy maintenance and cleaning
Convenient wire routing keeps critical electronic wires out of drive-train components and simplifies disassembly
Includes pinion gear (16T) and molded composite spur gear (50T)
Rigid one-piece motor mount utilizes standard motor screw mounting pattern
Large elevated speed control mounting area allows for easy screw mounting of common speed controllers
Upgraded dual bell-crank steering for more consistent steering and reduced bump-steer
16mm Big Bore molded composite shocks with pre-load clips
Hard anodized 7075-T6 aluminum chassis
3mm aluminum shock towers
Durable 12mm thick suspension arms
Rear molded CVA boots to keep dirt and mud out of rear joints
Alloy steel turnbuckles
Caster blocks adjust 14, 16, or 18 degrees with molded inserts
Adjustable suspension pivot bushings for different pivot height options
4.30:1 ratio gearboxes
3.5mm light CVA drivetrain
Pre-drilled wing with adjustable angle and location
Blue aluminum drive hexes
Blue aluminum nylock wheel nuts
AE LPR lightweight truggy wheels (#89360)
Utilizes 3 hook-and-loop straps to secure LiPo batteries into battery tray
Enclosed receiver box to protects electronic components
1.5mm thickness unpainted polycarbonate RC8T body
Specifications
RC8Te Kit, unassembled #80911
Scale: 1:8
Power: Electric
Type: Off Road
Length: 571mm
Width: 429mm
Weight*: 3628
Wheelbase: 375mm
Internal Gear Ratio: 4.3:1
Drive: 4WD
Track: 352mm
Contents
Associated RC8TE 1/8 4WD Electric Truggy Kit 80911
Requirements
R/C 2-channel surface frequency radio system
Batteries:qty 1 or 2 6-cell NiMH type packs (7.4v) OR qty 1 or 2 2-cell LiPo type packs (7.4v, 11.1v, or 14.4v, depending on the compatibility of the speed control)
Note: if running LiPo, the charger and speed control have to be LiPo compatible.
Battery charger (peak detection charger recommended)
Electronic speed control
R/C electric motor
Tire adhesive
Paint for Lexan body
Tools: Phillips screwdriver, needlenose pliers, pencil-type soldering iron with Rosin core solder to solder motor wires, thread-locking compound, hobby knife, precision ruler, body scissors.
|
|
 |
 |
|
|
|
 |
 |
 |
