 |
 |
 |
 |
|
Product Detail |
 |
Features
Tamiya 1/10 DB01 Baldre Kit 58404
Chassis: DB01 plastic chassis with integrated bulkheads for simplified maintenance, chassis also locates heavy components near the center for optimum weight distribution
Drive: Four wheel two belt drive, tension adjustable enclosed with ABS resin covers to protect from dirt
Motor: 540 motor with pre-attached leads
Ball Bearings: Full set included
Shocks: Four oil filled CVA plastic body
Gearboxes: Enclosed, front and rear
Differentials: Ball type
Transmission: Single speed
Tires: Rear: 1.6" (41mm) wide, 3.3" (83mm) outer diameter Front: 1.2" (32mm) wide, 3.3" (83mm) outer diameter Inner Diameter 2.2" (56mm)
Wheels: One-piece dish type
Body: Lightweight polycarbonate Baldre buggy with rear wing
Suspension: Four wheel independent double wishbone with same configuration as the Tamiya TRF501X chassis
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank with servo saver
Specifications
VEHICLE-
Length: 15.5" (395mm)
Width: 9.8" (248mm)
Height: 6.2" (157mm)
Weight: 2.4lbs (1075g)
BODY-
Length: 11.25" (287mm)
Width: 6.12" (150mm)
Height: 3.0" (72mm)
Contents
DB01 rolling chassis with oil filled shocks, 540 motor, Baldre clear buggy body, spike tires, foam inserts, dish wheels, CVA oil-filled shocks, 17 tooth pinion gear, 91 tooth spur gear, rear wing, decal sheet and instructions
Requirements
Radio: 2-channel with 1 standard servo and Electronic Speed Control
Radio Batteries: 8 AA size
Battery: 6 flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Paint: Spray or brush-on for polycarbonate body
Misc. Items: Building and track equipment
|
|
 |
 |
|
|
|
 |
 |
 |
