 |
 |
 |
 |
| Product Detail |
 |
6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
Perfect for people who wants to move up from 4ch helicopter
Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
O-ring inside the center hub reduce oscillation of main blades
Powerful 370 super carbon brush motor used as the main drive and makes the flight much stable
The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
Hard, Light weight Main Blades
Brand new design for the structure
Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
Tail rotor driven by belt provide stable flight and low noise
NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
No need to worry about burning tail motors
Light and hardened wood blades provide great lift, only weight 11g
Outer placed gyro
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight
With length-adjustable servo push-rod, precision sub trim can be easily set
Approximately 10 minutes flight time on each charge
Best choice for Beginner - Advanced hobbyist
All spare parts and accessories are available
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)
|
|
 |
 |
|
|
|
 |
 |
 |
