 |
 |
 |
 |
|
Product Detail |
 |
Features
Novak Havoc Spec Brushless System 10.5 3033
120 day limited warranty
Brushless Motors Features
Fully programmable, user-friendly interface with nine adjustable parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings from 0-27%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-5%), Throttle Curve (Linear and Expo), Brake Frequency* (7 settings from 1-8 kHz), Reverse*, Motor Rotation* and Li-Po Cut-Off
Novak’s One-Touch Set-Up™ for quick, easy transmitter setup
Novak’s Smart Braking II™ enables users to "shift" from forward to reverse
Water-resistant case with gasket seal
Sensor-based for excellent braking and low-speed driveability
Nickel-plated, sintered, high-strength Neodymium rotor for increased motor acceleration, improved initial throttle response, improved performance in high-temperature conditions and natural drag brake
Oversized front bearing for increased load handling and bearing life
Auto Detect Brushed Motor Mode
Locked Rotor Detection and Thermal Overload Protection
Meets RoHS compliance and includes 120-Day Warranty
Designed and assembled by Novak in Irvine, California, using globally-sourced components
Motor Specifications
Voltage: 2S Li-Po cells or 4-7 NiMH cells (1.2V/cell)
ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm)
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
System Weight (with wires): 9.59 oz. (272.0 g)
Design: Sensor-based
Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor
Motor Limit (brushed): 27-turn for 540-size motor / 12-turn for 550-size motor
On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp.
BEC: 6.0 volts DC / 1.5 amps
Rated Current: 120 Amps @ 25°C trans. temp.
Braking Current: 120 Amps @ 25°C trans. temp.
Status LEDs: 4
Voltage Cut-Off: 6.25V (when Li-Poly Cut-Off Circuitry is enabled)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire with Tamiya Battery Plug
Motor Magnet: Nickel-plated, sintered, high-strength Neodymium
Motor Watts: 235 (#3033), 195 (#3034), 130 (#3035), 85 (#3036)
Motor Turn: 10.5 (#3033), 13.5 (#3034), 17.5 (#3035), 21.5 (#3036)
Motor KV (unloaded): 4,200 (#3033), 3,300 (#3034), 2,200 (#3035), 1,800 (#3036) RPM/Volt
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
Bearing Size: 1/2” x 3/16” (12.7x4.8mm)
Timing Ring Colors: 10.5 (blue), 13.5 (orange), 17.5 (yellow), 21.5 (green)
Contents
Novak HV Pro ESC, HV-10.5 Brushless Motor, factory installed heat sink on motor and ESC, factory installed power trans-cap module on ESC, ESC cooling fan, mounting hardware and instructions
Requirements
Installing in vehicle
Product Not Available Yet Preorder yours today.
Due in Stock: On Order
|
|
 |
 |
|
|
|
 |
 |
 |
