 |
 |
 |
 |
|
Product Detail |
 |
Features
Novak GTB/SS 13.5 Pro Stock Brushless System 3013
Brushless Motors Features
SS13.5 Brushless Motor (NOVC3413);
Provides lap performance similar to a 27-turn racing stock brushed motor but with the brushless advantage of minimal maintenance, long life and increased run times
Sensor-based technology for excellent low-speed drivability, starting torque and low speed accelerationprovide high power and great
High-strength rotor
Direct-solder wiring tabs for flexible soldering options
Oversized front bearing (3/8 x 1/2") for extra durability anding and extended life (also used in Velociti-series motors)
ESC Features
Novak GTB Programmable Electronic Speed Control (NOVM1710);
Four different color status LEDs for easy set-up, programming and profile selection
3 fully-programmable fwd/brake/ Brushless profiles
1 fully-programmable fwd/brake/ Brush motor profile
1 fully-programmable fwd/brake/rev Brushless motor profile
1 fixed-programming Limited Reverse (25%) profile
Programming adjustments include; Min Drive, Min Brake, Drag Brake &
Dead Band, Drive Frequency adjustable in the Brush-Mode
Low profile high volume cooling fan and factory team Power Trans-Cap Module
Gold plated PCB direct-solder tabs and 6-layer circuit boards for lowest possible voltage drop and easy power wire replacement
User replaceable input harness, long and short input harnesses supplied
Remote power programming switch combines one-touch button and ON/OFF switch, can be remotely mounted for easy programming adjustments and powering ESC ON and OFF
Water-resistant case with complete gasketing for improved protection
120 day limited warranty on both components
Motor Specifications
SS13.5 Brushless Motor
Input Voltage: 4-6 cells (1.2V/cell)
Watts: 165
KV (unloaded) 3,300 RPM/volt
Magnet: One-piece, multi-pole cylindrical high-strength neodymium
Size: 2.08" L x 1.41" D (52.8 x 35.8mm)
Shaft Diameter: 0.125" (3.2mm) (acepts all existing pinion gears)
Weight: 6.4 oz. (181 grams)
Front Bearing Size: 1/2 x 3/16" (12.7 x 4.8mm)
GTB Programmable Electronic Speed Control
Size: L 1.49" (37.8mm), W 1.16" (29.5mm)
Weight: 1.36oz (38.5g) without wires
BEC: 6.0V/3.0A
Input Voltage: 4-6 cells (1.2VDC/cell)
*On Resistance (Brushless): 0.00040 ohms
*On Resistance (Brush Mode): 0.00013 ohms
*Rated Current (Brushless): 540A/phase
*Rated Current (Brush Mode): 1620A
Battery/Motor Wire:14AWG silicone
Throttle Profiles: 6 (5 Brushless/1 Brush)
Drive Frequencies: 1 of 7 (1.5-11kHz)
Minimum Drive: 1 of 5 (2-12%)
Minimum Brake: 1 of 10 (5-50%)
Dead Band: 1 of 5 (2-6%)
Braking Style: Std or Drag Brake
Drag Brake: 1 of 10 (10-50%)
Brushless Motor Limit: Any Novak
Brushed Motor Limit: None
*Transistor rating @ 25°C junction temp
Contents
Novak GTB Programmable Electronic Speed Control with Factory Installed Power Wires and Power Trans Cap Module, User-Replaceable Remote Power Programming Switch and Input Harness (two lengths included), Instructions, double Sided Tape SS13.5 Brushless Motor
Requirements
Installing in vehicle
|
|
 |
 |
|
|
|
 |
 |
 |
