 |
 |
 |
 |
|
Product Detail |
 |
Features
Novak GTB/Velociti Racing Brushless System 4.5 3001
Ready to race out of the box, nothing else to buy
Speed control factory wired to motor
For use with 4-6 cells
120 day limited warranty on both components
Brushless Motors Features
Velociti 4.5R Brushless Motor: (NOVC3404)
Standard 540 size specifically designed for R/C vehicles
One-piece high power Neodymium cylindrical magnet for high performance, improved rotor reliability and increased efficiency
Full ball bearing design with oversize front bearing for smooth low-friction operation and superior torque handling ability
Sensor based for excellent starting torque and excellent drivability
Meets all ROAR specifications
Direct solder tabs, locked rotor protection and thermal overload protection
Maintenance free design
ESC Features
GTB Electronic Speed Control: (NOVM1710)
Can be used with Brushless or Brushed motors, has no Brushed motor motor limit
Compatible with Velociti 5.5 Racing (NOVC3405), Velociti 6.5 Racing (NOVC3406), SS5800 (NOVC3400) and SS4300 (NOVC3401)
Four different color status LEDs for easy one touch setup and quick selection of 6 built-in throttle profiles
3 fully-programmable fwd/brake Brushless Profiles
1 fully-programmable fwd/brake Brush Motor Profile
1 fully-programmable fwd/brake/rev Brushless Profile
1 fixed programming Limited Reverse (25%) Profile
Brushless mode has 4 adjustable parameters Minimum Brake, Drag Brake Deadband and Minimum Drive
Brushed mode is fully programmable with all of the adjustments of the
Brushless mode plus Adjustable Drive Frequency
One touch set-up, heat sink and cooling fan, replaceable input and switch harness, thermal overload protection and water-resistant case
ESC Specifications
Length: 1.49" (37.8mm)
Width: 1.16" (29.5mm)
Weight: 1.36oz (38.5g) with heat sink, no wires
Input Voltage: 4-6 cells (1.2V DC/cell)
Brushless Motor Limit: Any Novak Motor
Brush Motor Limit: None
BEC (Battery Eliminator Circuitry): 6.0V/3.0A
Rated Current: 540A (Brushless per phase) 1620A (Brush mode)
ON-Resistance: 0.00040 Ohms (Brushless), 0.00013 Ohms (Brush-mode)
Throttle Profiles: 6 (5 Brushless & 1 Brush motor)
Motor Specifications
Diameter: 1.41" (35.8mm)
Length: 2.08" (52.8mm)
Shaft Diameter: 0.125" (3.2mm)
Weight: 6.73oz (191g) Without Power Wires
Number of Turns: 4.5
Voltage Handling: 6 Cells (1.2V DC/cell
Commutation: Sensor Based Electronic
Protection: Locked Rotor and Thermal Overload
Power Wire: 14AWG Silicone
Magnet: High-strength Neodymium (1-piece multi-pole)
Contents
GTB Electronic Speed Control with Cooling Fan, Velociti 4.5R Brushless Motor, Racing Power Trans Cap Module, Double-Sided Tape & Operating Instructions
Requirements
Installing in vehicle
|
|
 |
 |
|
|
|
 |
 |
 |
