 |
 |
 |
 |
|
Product Detail |
 |
This is the Kontronik Fun 500-27 Brushless Motor, Jazz 40-6-18 Speed Control,
and KPG27 5.2:1 Gear Drive set.
This expert class set is ideal for converting larger aircraft
to electric such as the Great Planes Fokker DR1 .60 ARF,
Piper J-3 Cub .40-.46 ARF, P-51D,
Pitts Special, PT-17 Stearman, and Tiger Moth.
FEATURES: Eliminates the need to match up separate motors and ESCs
For batteries up to 10 cells
Pushbutton setup
Gear drive includes machined aluminum construction, planetary gears
Teflon bearings, and a weight of 1.94oz (55g)
Programmable speed control modes include:
Auto-Programming Mode (APM): For general purpose use, identifies
throttle range from initial radio stick movement, sets average
brake strength and Low Voltage Cutoff to 0.8V per cell
Glider: Sets average brake strength and Low Voltage Cutoff to 0.8V
per cell
Airplanes and Boats: Brake function disabled, Low Voltage Cutoff
not set
Competition (FB5, FB5 10 cells, F5D): Brake set at maximum speed
for folding props, low voltage not set (but can be manually
adjusted, temperature and current overload disabled, RPM limit
set at maximum, no Safe-Start function
Heli: RPM control enabled for maintaining rotor head speeds in
loaded conditions
Two Car Modes: Forward only or forward and reverse, Low Voltage
Cutoff not set, throttle range set for car applications, no Safe-
Start function
Reverse Rotation: Motor rotation can be reversed by reversing
wiring sequence to motor, or changing to reverse programming mode
LiPo Battery Mode: Sets speed control to recognize LiPo batteries
EMF brake with 10 brake strength settings
Automatically sets optimum operating frequency (range is 8-32kHz)
based on motor inductance and winding resistance
Adjustable Low Voltage Cutoff protection for NiCd and NiMH batteries
(0.8V default), Low Voltage Cutoff protection for Lithium batteries
of 3.0V per cell
Unlimited "partial load capability" design allows for high efficiency
when operating at less than full power
Two year warranty
INCLUDES: Fun 500-27 Brushless Motor w/KPG27 Gear Drive with 5.2:1 ratio
(KONG2461)
Jazz 40-6-18 Speed Control with Universal radio connector (KONM3100)
REQUIRES: Installing in model
Prop Adapter: GPMQ4610
Motor Mount: Can use JTCG6801
COMMENTS: Speed control cannot be used with Brushed motors.
Designed for Sensorless, Brushless motors but can be used on some
non-Kontronik Sensored motors.
|
|
 |
 |
|
|
|
 |
 |
 |
