 |
 |
 |
 |
|
Product Detail |
 |
This is the Castle Creations Phoenix-25 amp Brushless Sensorless ESC.
This speed control is specifically designed for Brushless application.
NOT to be used with Brushed motors. Doing so will ruin ESC.
FEATURES: Extremely low resistance (.013 Ohm)
High rate (11kHz) switching
Up to 25A continuous current with proper air flow, 35A surge
Five to eight cells with four micro servos
Up to ten cells with three micro servos
16 cells max with BEC disabled
Dynamic braking ensures folding props fold properly
BEC (1.5A) provides power to receiver and servos-eliminates need for
a separate receiver battery
User programmable features:
Low voltage cutoff
Over-current protection
Brake type
Throttle range
Timing advance
Cutoff type
Soft start Ramp Up
Runs motor in forward or reverse
Auto motor in cutoff with reset
Safe Power ON arming program ensures motor won't accidentally turn ON
Low torque soft start prevents damage to fragile gearboxes
Auto Shut Down when signal is lost or radio interference becomes
severe
INCLUDES: Instruction sheets
Phoenix 25 ESC
REQUIRES: Soldering to motor and connector
Soldering iron HCAR0775
Solder WSDC4030
Battery connector (specific to customer's connectors)
SPECS: Length: 1.5" (37mm)
Width: 1" (25.4mm)
Height: 3/16" thick (5mm)
Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end
7" (178mm) servo wire with Universal connecter
COMMENTS: Be sure to have correct polarity, incorrect polarity can damage the
speed control unit
|
|
 |
 |
|
|
|
 |
 |
 |
