 |
 |
 |
 |
|
Product Detail |
 |
O.S. 18CV-RX w/11G Slide Carb OSMG2102
This is the O.S. Max .18CV-RX Engine with 11G slide valve carburetor, pull starter and standard crankshaft.
Good for all ready-to-run 1/10 scale cars & trucks that require a pull-start power plant. Especially suited for off-road trucks and vehicles with single-speed transmissions.
Fits Kyosho® Ultima ST Type-R Evolution, Tamiya TNX and the Tamiya TGR.
Features
O.S. 18CV-RX w/11G Slide Carb OSMG2102
Larger displacement and more power in a .15 size crankcase
Slide valve carburetor with two screwdriver-adjustable needles, mixture control screw, 360° fuel inlet, 6.5mm bore
True ABC construction with CAD designed 3-port liner
Machined, aluminum piston boosts performance and enhances durability
Standard ball bearing supported crankshaft with enlarged fuel ports for smoother air and fuel flow
Larger, thicker rear bearing handles racing loads with ease
High volume #203 air filter assembly with two pre-oiled foam elements
Standard side exhaust
Two year warranty
Specifications
Bore: 0.63" (16.0mm)
Stroke: 0.59" (15.0mm)
Displacement: .18 cu in (3.0cc)
Practical RPM: 3000-32,000
Power Output: 1.35 PS/28,000 RPM
Weight without Muffler: 10.4oz (295.5g)
Width between mounting holes same side: 0.4" (11mm)
Width between mounting holes opposite side: 1.2" (31.4mm)
Crankcase width: 1.6" (40mm)
Distance from starter to drive hub: 2.9" (74.8mm)
Distance from starter to end of crankshaft: 3.4" (87.8mm)
Distance from center of crankcase to drive hub: 1.6" (41mm)
Height/bottom of crankcase to top of cylinder head: 4" (100.9mm)
Height/center of crankshaft to top of cyinder head: 3.2" (80.9mm)
Package Contents
One O.S. Max .18CV-RX engine with, 11G carb, pull starter, #8 glow plug, air filter assembly with two elements, mounting spacers, four 3 x 14mm phillips head screws, instruction manual
Requirements
Glow fuel for vehicles with 5%-30% nitromethane and no less than 18% lubricant content
Fuel filter
Medium fuel tubing
|
|
 |
 |
|
|
|
 |
 |
 |
