 |
 |
 |
 |
|
Product Detail |
 |
O.S. 15CV-X w/10E Rotary Carb OSMG2034
This is the OS Max .15CV-X Pull Start RC Car/Buggy Engine.
It has the Same Mounting and Muffler Dimensions as the .12CV and CZ-R.
Features
O.S. 15CV-X w/10E Rotary Carb OSMG2034
Unique Blue, "Heat Vent" Squared, Diagonal Slotted Cylinder Head
Charcoal Gray Finned Crankcase
Rotatable Carburetor Secured to Crankcase by Pinch Bolt
New #10E Rotary (not Slide Valve) Carburetor w/Dual Needle for High and Low Speed, Idle Adjustment & Screwdriver Adjusted Needle Valve
Front and Rear Ball Bearings
Side Exhaust
Can be converted into a .15CVX-DF (See Comments)
2-Year Warranty
Specifications
Displacement: 2.49cc (0.152 cid)
Weight: 264g (9.32oz)
Bore: 15.2mm (0.598")
Stroke: 13.7mm (0.539")
Power Output: 0.68 bhp @ 29,000 RPM
Practical RPM: 3,000-30,000
Crankshaft Thread: 5mm
On-Center Mounting Holes, Front to Rear: 11mm
On-Center Mounting Holes, Side to Side: 31.4mm
On-Center Exhaust Mounting Holes: 27.5mm
Back of Engine to Front of Drive Washer: 74.7mm (2-15/16")
Engine Height: 84mm (3-9/32")
Package Contents
One Assembled .15 CV Pull Start Engine
One Super 102 Air Cleaner
Three Blue Foam Elements
Four 3x14mm Phillips-Head Round Head Screws
Two L:20mm, W:6mm, H:4mm Engine Mount Spacers
One Set of Instructions w/Parts List and Decal Sheet
One #A3 Glow Plug (OSMG2690)
Requirements
Fuel with at least 16% lubricant and 10%-20% Nitro
Muffler (exhaust system) depending on vehicle
|
|
 |
 |
|
|
|
 |
 |
 |
