 |
 |
 |
 |
|
Product Detail |
 |
This is a SuperTigre G90, the updated version of the S90K. The main differences between the two engines are that the G90 is a one-piece crankcase (S90K was a two-piece), and the G90's muffler is a bolt-through-the-crankcase (S90K muffler bolted onto the crankcase). * 3-YEAR Warranty
Features
Super Tiger G-90 Ringed w/Muffler 11003544 SUPG0235
Ringed piston
Schnuerle scavenged
Dual ball bearing-supported crankshaft
Unique bolt-through muffler uses muffler bolts, lock washers, and nuts to secure muffler to engine (no more stripped threads on the crankcase or muffler).
Steel cylinder liner
3-YEAR warranty
Specifications
Bore: 1.083" (27.5mm)
Stroke: .976" (24.8mm)
Weight w/o muffler: 589g (20.66oz)
Weight with muffler: 765g (27oz)
Displacement: .90 cu in (14.73cc)
Output: 2.5 bhp at 14,800 rpm
RPM Range: 2,500-16,000
Width between centers of mounting holes: 50mm (1.97")
Length between center of mounting holes: 20mm (.79")
Width of crankcase excluding mounting flanges: 42mm (1.65")
Length from backplate to front of drive washer: 97mm (3.82")
Height from bottom of crankcase to top of head: 108mm (4.24")
Crankshaft size: 5/16-24
Suggested prop size: 12x8, 13x6
Contents
One Assembled engine w/glow plug (SUPG1200)
One Muffler, Muffler Gasket, Exhaust Stack, Pressure Fitting, and
Hardware Bag w/Bolts, Washers, Nuts, and Carb Retainer.
One Carburettor
One Set of Instructions, Parts Diagram, SuperTigre decals
Comments
Since this engine uses the exhaust stack from the S-75K, some after-market mufflers will fit this engine (using the muffler screws from the G75) and some will not. Check the optionals in the Accessory Completion Guide for after-market exhaust systems that will work.
|
|
 |
 |
|
|
|
 |
 |
 |
