 |
 |
 |
 |
|
Product Detail |
 |
This is a .61 2-Stroke Airplane Ringed Engine w/ Remote Needle Valve from GMS.
FEATURES: Ball bearing-supported crankshaft
Remote mount High Speed Needle Valve mounts to rear cover plate to
prevent injury from spinning propellers
Low speed needle-equipped carburetor
Ringed piston
Adjustable exhaust outlet on muffler allows 360° rotation of
muffler tip
Gold anodized heatsink head
One-piece crankcase with a bead-blasted finish
2 year warranty on all GMS engines
INCLUDES: One .61 ringed airplane engine
One bolt-through muffler
One carburetor
One remote High Speed needle valve with mounting bracket
One glow plug
Two allen key tools
Two muffler screws
One manual and parts list
REQUIRES: Attaching High Speed remote needle valve and muffler.
10-15% nitro airplane fuel.
11x7 break-in propeller
SPECS: Displacement: .61 cid (9.97 cc)
Bore: 23.8mm
Stroke: 22.4mm
Output: 2 BHP at 15,000 RPM
Practical range: 2,000 - 13,000 RPM (with 11x7 prop)
Weight: 26oz (737g) with muffler
Center distance width across mounting holes: 2.0" (52mm)
Center distance length of mounting holes on same side: 1" (25mm)
Length from front of crankcase to backplate screws: 4.0" (102mm)
Width across mounting flanges: 2.4" (61mm)
Total height of engine: 4" (101mm)
Length from center of head to front of crankcase: 2.9" (73.5mm)
Widest width of crankcase neglecting mounting flanges: 1.7" (43mm)
Length from front of crankcase to center distance of front
mounting hole: 2.4" (61mm)
Height from crankshaft center to top of head: 3.1" (79.5mm)
Crankshaft thread size: 5/16-24
COMMENTS: Use the following size propellers depending on your type of model
Sport Model: 11x8
Racing Model: 11x7
Scale Model: 12x6
For the GMS .61 engine with front-mounted needle, use GMEG1061.
All GMS engines use the same owner's manual
Factory Needle Settings:
High Speed Needle: 1.5 turns OUT from closed
Low Speed Needle: 2 turns IN from flush with throttle arm
|
|
 |
 |
|
|
|
 |
 |
 |
