 |
 |
 |
 |
|
Product Detail |
 |
This is a .32 2-Stroke Airplane ABC Engine w/ Front Mounted Needle Valve
from GMS.
FEATURES: Ball bearing-supported crankshaft
Front mounted High Speed needle valve
Low Speed needle-equipped carburetor
Aluminum Brass Chrome piston/sleeve construction
Adjustable exhaust outlet on muffler allows 360° rotation of
muffler tip
Gold anodized heatsink head
One-piece crankcase with a bead-blasted finish
2 year warranty on all GMS engines
INCLUDES: One .32 ABC airplane engine
One bolt-through muffler
One carburetor
One muffler gasket
One glow plug
Two allen key tools
Two muffler screws
One manual and parts list
REQUIRES: Attaching carburetor and muffler.
10-15% airplane nitro fuel.
8x6 size propeller for break-in
SPECS: Displacement: .32 cid (5.20 cc)
Bore: 19.8mm
Stroke: 17.0mm
Output: 1.2 BHP at 18,000 RPM
Practical range: 2,000 - 20,000 RPM
Weight: 10.76oz (305g) with muffler
Center distance width across mounting holes: 1.5" (38mm)
Center distance length of mounting holes on same side: 0.59"(15mm)
Length from front of crankcase to backplate screws: 2.7" (69mm)
Width across mounting flanges: 1.7" (45mm)
Total height of engine: 3.02" (76.8mm)
Length from center of head to front of crankcase: 1.9" (48mm)
Widest width of crankcase neglecting mounting flanges: 1.2" (30mm)
Length from front of crankcase to center distance of front
mounting hole: 1.5" (39mm)
Height from crankshaft center to top of head: 2.4" (61.8mm)
Crankshaft thread size: 1/4-28
COMMENTS: Recommended propeller sizes: 8x6-9x6
For the GMS .32 engine with remote mounted needle, use GMEG1132.
To convert to a remote needle use GMEG7255 & GMEG7355
All GMS engines use the same owner's manual
If using the Slimline Pitts (SLIG2216) one must use the screws supplied
with the muffler.
For Bisson Pitts use screws supplied with engine.
|
|
 |
 |
|
|
|
 |
 |
 |
