 |
 |
 |
 |
|
Product Detail |
 |
The Corona 2.4Ghz system replaces the standard JR module on most JR PPM systems equipped with an FM module.
If you want to upgrade your transmitter to 2.4Ghz, this module is exactly for you are looking for! This 2.4GHz transmitter module and receiver are designed to completely eliminate radio interference and glitches which have troubled model hobbyists for years.
Direct Sequence Spread Spectrum (DSSS) uses a carrier that remains fixed to a specific frequency band. The data signal, rather than being transmitted on a narrow band as is done in microwave communications, is spread onto a much larger range of frequencies (RF bandwidth) using a specific encoding scheme. This encoding scheme is known as a Pseudo-noise sequence, or PN sequence.
The 2.4G system has made digital communication come true and sends an error free signal to the receiver which is decoded faster than ever before.
Features
Corona 2.4GHz JR DSSS V2 TX Module & 8CH Receiver RX
Extended operation range of 1.5Km range with has been tested in the real flying environment.
A 5dbi gain transmitting antenna ensures the wave lengths are evenly distributed throughout the transmitting horizon ensuring the stable signal
One key user friendly set up mode.
The unique receiver design makes the Corona modules easy to be installed and ensures reliability
Corona's advance needle design ensures the lightest signal receiver.
*Please take note of the Rx and Tx versions. V1 and V2 are not compatible.
Specifications: Receiver
Type: 2.4G DSSS
Size: 46mm*25mm*16mm
Channel: 8
Voltage : 4.8 V - 6V
Range : more than 2100m
Resolution: 10bit
Operating current : 30 MA
Sensitivity : 100dbm
Latency : 22ms
Package Contents
Corona 2.4GHz JR DSSS V2 TX Module
Antenna
2.4Ghz 8CH V2 Receiver RX (CR8D)
|
|
 |
 |
|
|
|
 |
 |
 |
